Our scalder panels are made for chicken plants, while our MX7-10 is our universal temperature controller that can be included into any poultry package.If you do not see a Valtorc product below that meets your specifications, please contact our sales staff to inquire about your Actuator or Valve requirements.
PROCESS CONTROLLING PRODUCTS
The IP6000 is designed for control applications lhat require a high degree of reiabi1ty and repeatability at an economical cost Optional NEMA 4X (IP65) version allows for splashdown and outdoor installation. Typically these units are used for applications that require the operation of valve actuators. pneumatic valve positioners, damper and louver actuators, final control elements. relays. air...
TEMPERATURE CONTROLLER SERIES MX-7-10
The MX-7-10 series are microprocessor controllers, using H8/Tiny 16-bit CPU (H3687). Applications are control of temperature, humidity, flow and pressure. Change input to TC or RTD through a simple and easy software switch, also offers a various selection of inputs and outputs. Uses "PID +Fuzzy Logic" operation principle, to control fine demands. The MX-7-10 series has basic control and...
POULTRY SCALDER PANEL
Eliminate temperature control problems a Valtorc International control panel. Arl electronic sensor installed at a measurement location continuously sends input signals to the controller. The controller compares this signal to a predefined set point at set intervals. If the input signal deviates from the set point, the controller sends a corrective output signal to the control element. This...
STRAIN GAUGE LEVEL & PRESSURE TRANSMITTER
High accuracy & stability Dual diaphragm isolating unit (safest in the industry Standard stainless steel diaphragm unit, Dual temperature compensation (in sensor and in housing) Ease of installation & service Wide range selection (30" vacuum to 5000 psig) Modern 2-wire system, 4-20mA isolated output signal Simple field calibration Low cost, fast delivery.
The Series SYS-400 is a level transmitter providing a two-wire 4 to 20 mA output to indicate level of liquids, powders and bulk materials. State of the art sensing technology in the Series 400, using impulse RF admittance measurement provides excellent accuracy and stability. The CRF2 senses capacitance changes resulting from the height of the material in the tank between the probe and the tank...
RF LEVEL PROBE
The RF probe type level transmitter is enclosed in an explosion proof, NEMA 4,7 and 9 case with a measuring range of 6" - 40" and a maximum temperature rating of 250F @ 100PSIG. Process connection uses 3/4" NPT (optional 2" or 3" flanged; 150# ANSI, PVC or 316 stainless steel).
CONDUCTIVITY LEVEL SWITCH
Systematic's level switch features probe voltage of 7VAC, max 15mA and probe to control box distance of 1000' max. NEMA 4x enclosure and 316 stainless steel wetted parts (PVC).
RTD & THERMOCOUPLE
316 Stainless Steel. 1/4" 0D ROD. Dual or single element - 1/2 NPT process connection, NEMA 4x aluminum head with Various lengths. 1/2" x 1/2" double headed hex fitting with welded ends.