Control valves regulate the flow of fluids as the position of the valve plug or disk changes with the force from the actuator. For this the valve has to achieve different things:

The development in technology has resulted in the creation of several styles of control valve bodies. Some of them can be used for different purposes as required. Let us look at some of them:

Single port valve bodies

This is the most common style and is simple in its construction. Various forms of this valve seat are available – angle, globe, forged, bar stock, and split constructions. The single port valves are used where the shut off requirements are stringent. In these valves metal to metal seating surface or soft seating with PTFE or other material is used to make the seat. Most service requirements can be handled with these types of valves. Due to the fact that the high pressure fluid is loaded in the complete area of the port, there is an unbalanced force created and this should be kept in mind while choosing actuators for them.

Balanced plug cage style valve body

This is also a popular type of valve used for many purposes. In this only one seat ring is used and hence it can be considered to be single ported. This provides the advantage of a balanced valve plug which usually only double ported valves provide. With the cage style trim there is the benefit of valve plug guiding, seat ring retention, and flow characterization. Apart from the sliding piston ring type seal separating the wall from the upper portion of the valve plug the cage cylinder completely ensures that there is no leakage of the upstream high pressure fluid into the downstream system which is lower pressure.

High capacity cage guided valve bodies

These are mainly designed for noise applications like high pressure gas reducing stations where the velocity of the gases is quite high especially at the outlet of the conventional valve bodies. There are oversized end connections incorporated in the design with a streamlined flow path which makes the trim maintenance easy with cage style constructions

Port guided single port valves

These are also very popular for different applications. They usually contain a screwed seat ring which can be difficult to take out later. It is possible to choose a smaller actuator for this type of valve due to the reduced dynamic forces acting on the plug, even though it is a single ported one with similar capacity.

There are many other types of valve seat materials and bodies that can be chosen according to the requirement at hand. You can learn about the different types of valve bodies, seat materials and their proper usage by conducting some research on the internet. There are not only the websites of the suppliers of these items, there are also many articles and blogs providing information about the different types of valves, seat materials and their usage.