Valtorc International V-Port Ball Valves are a high performance solution to your industrial V-Port Ball Valve needs.  Valtorc ARRA Certified V-Port Ball Valves are available in sizes ranging from 1/2” to 12” in materials such as Carbon Steel, Stainless Steel, Brass and Cast Iron.  Available end connections include Threaded, Socket Weld, Butt Weld and Flanged.  If you do not see a Ball Valve that meets your specifications, please contact our sales staff to inquire about your V-Port Ball Valve requirements and customizations to existing valves.

Series VP-60 V-Port Ball Valves

Features:

• VALTORC "VP-60" Series V-Port Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve.
• We offer V-Port Ball Valves 1/2" - 4" in a 3-piece design and 1/2”- 6" flanged.
• The standard "V" notch options are 30, 60 & 90.
• While they are available as manual valves, we specialize in automating them to suit your particular control requirements.
• V-Port Ball Valves offer better and more consistent control than traditional round ported ball valves.
• We offer this valve with the control port cast and machined into the ball, not in the seat.
• This allows for much better flow characteristics and eliminates the need to replace seats.

Series 900 V-Port Ball Valves

Features:

• High Rangeability - 300:1  Turn down ratio V-Port Ball Valve
• Equal Percentage Flow Characteristic
• Low Pressure Recovery Rate - minimizes cavitation and excessive noise
• Multi-Body Rating ANSI 150/300
• ASME B16.10 Face to Face Dimensions
• ANSI leakage class VI
• High performance Carbon Steel or Stainless Steel Body ANSI Class 150 and 300
• Available in Threaded/Wafer (1" - 2") or Flanged (3" - 6") Body.
• Stainless Steel Ball and Stem for long life.
• Spring loaded Teflon  V-Ring packing, maintenance free design with 400ºF temp. at 250psi rating using Stanyl PA46 bushings.
• Shaft and segmented ball, pinned and welded.
• Flow direction indication for easy installation.
• ASME B16.10 Face to Face dimensions.

The Unique Family of "V" Ball Control Valves
Options Available: Sizes: 1/2" to 4" V-Type modulating control valve High precision controls & stability Exchangeable V-Elements 30°,60°, or linear slots as required Tight Shut-off, up to 1000 psi Compact size, with high volume capability for best efficiency!! Image Features: A 30° V-slot in a stainless steel full port ball valve, 3-piece design, threaded ends, with mounting pad for the actuator. Spring return actuator and electro/pneumatic postioner PVC Ball valve with V-Ball features for applications where PVC material is required for the process (corrosion resistance, etc)
V-Seat & V-Slotted Characterized Seat Control Valves
We have a complete line of V-Port Ball Valves / V-seat and slotted seat control valves providing precision throttling control for a wide range of applications. As with our standard ball valves, V-characterized seated valves offer equal percentage flow characteristics. The slotted seated valves have an inherent linear flow characteristic. Simplicity - Very low maintenance costs compared to globe and segmented ball valves Tight Shutoff - Exceeding Class VI and bubble-tight High Rangeability - Repeatable control through 95% travel Low Cost - Purchase price is substantially lower than competitive high pressure drop valve Low weight - about 30% lighter than globe control valve Compact Size - Leaves more room for additional field equipment Shearing Action - Non-clogging control of fibers and solids Low Flow Control - Cv as low as 0.07 Flexible CV -Interchangeable seat angles or slots Erosion Resistant - Extra tough, hardened seat and ball High Pressure Drop - Liquids up to 500 psi, steam up to 150 psi High Temperature - Up to 1,000°F Maximum Flow Rates (CV) For 1" Valves Full Port Reduced Port 60° V 30° V Slot 57 32 14.8 5.5 3.7 A typical comparison for a 1" valve The CV graph shows the range of flow for the standard port, 60°V and 30°V ball valves. The characterized V seats provide finer control than round port valves.
Modern Test Facilities Measuring V-Port Valves & Flow
This newly designed & built test bench, enables us to test andevaluate "V-Port" valves and flow measuring instruments.
1" "V-Ball" control valve tested under variable conditions.

Please note: due to our growing inventory, development and design of new products our online catalog may not show models that have just been released. If you do not see a particular product on this page that you need, call our sales team at 1-866-VALTORC or locally at 770-423-7100 for an immediate quote and assistance.