1000WOG, NPT THREADED ENDS, WITH MOUNTING PAD DRILLED
AND TAPPED AND LOCKING HANDLE

• ISO 9002
• The thread ends conform to ASME B 1.20.1(NPT)
  ISO 228/1 & ISO 7/1 DIN 2999 & BS21
• Investment casting
• Blow-out proof stem
• Full port
• 1000 psi WOG
• 15% glass fiberfill PTFE reinforced seat
• PTFE seal & packing
• Latch lock handle

2000WOG/1500WOG, NPT THREADED ENDS, WITH ISO
MOUNTING PAD AND LOCKING HANDLE

• ISO 9002
• The thread ends conform to ASME B 1.20.1(NPT) DIN 2999 & BS21
• Investment casting
• Blow-out proof stem
• Standard port
• 2000/1500 psi WOG
• 15% glass fiberfill PTFE reinforced seat
• Mounting pad refers to ISO 5211 & DIN 3337
• Latch lock handle

ANSI 300LBS, FLANGED ENDS, WITH LOCKING HANDLE

• ISO 9002
• The flange ends refers to ANSI B 16.5
• Face to face: ANSI B 16.10
  Wall thickness: ANSI B 16.34
• Investment casting
• Blow-out proof stem
• Full port
• Class 300
• 15% glass fiberfill PTFE reinforced seat
• PTFE seal & packing
• ISO mounting pad
• Locking handle

1000WOG, CLAMP END, CAVITY FILLED VIRGIN TEFLON SEAT,
WITH MOUNTING PAD & LOCKING HANDLE

• ISO 9002
• Clamp end cavity filled
• Investment casting
• True I.D. bore
• Blow-out proof stem
• 1000 psi WOG
• Mounting pad
• Mounting pad refers to ISO 5211 & DIN 3337
• Latch lock handle
• Internal finish 15RA

1000WOG, T-PORT, NPT THREADED ENDS, WITH MOUNTING PAD
DRILLED AND TAPPED & LOCKING HANDLE

• ISO 9002
• The thread ends conform to ASME B 1.20.1 (NPT)
  DIN 2999 & BS21 ISO 228/1 & ISO 7/1
• Investment casting
• Blow-out proof stem
• Standard port
• 1000 psi WOG
• 15% glass fiberfill PTFE reinforced seat, seal & packing
• Mounting pad drilled & tapped
• T port
• Latch lock handle

• Three Piece Design
• Sizes 1/4 to 2-1/2 Inch
• Reduced port or Full port
• Available in Carbon steel, 316 Stainless steel & Brass bodies
• Special alloys available upon request
• Double Bevel washer to compensate for temp fluctuations & wear
• Available in NPT, socket weld & butt weld: Sch. 10 thru 80,
  1-line, clamp, Tank Bottom, ANSI flanged to 300 Ibs.
• ISO 5211 Mounting Pad (optional)

• Fire safe to API 607
• Sizes 1/4 to 2-1/2 inch
• Reduced and Full Port
• Available in Carbon steel, or Stainless steel bodies
• Special alloys available upon request
• Three piece body, blow out proof stem & enclosed
  body bolts . Live loaded stem seal
• Available in threaded, socket weld & butt weld ends

• Sizes 1/4 to 4 inch
• Reduced & Full port
• Stainless steel body and trim
• 1-line or clamp end
• Optional cavity fill

• Sizes 1/4" to 10 inch
• Full 270 degree rotation for wide range of control
• Low cost of ownership
• Available in carbon steel, stainless steel or brass bodies
• End connections are NPT, socket weld, butt weld, ANSI 150-300, 1-line, clamp and BSPT
• Bubble tight shut
• Temperature range - 320 to 600° F
• In-line reparability
• Delta P to 600 PSIG

• ANSI Class 150-300 Reduced port
• Available in carbon steel or stainless steel body
• Special alloys available upon-request
• API 607 certified
• Seat material: TFE,MTFE,RTFE, PEEK, and Stainless Steel
• Sizes 1/2 inch through 8 inch
• Optional NACE
• Optional Control seats
• Optional Cavitation control trim

• Sizes 3 to 10 inch
• 90 and 180 degree operations with blow out proof stem .
  Available in ends of NPT, SW, BW and flanged to 300 lb ANSI
• Operation by utilizing the bottom inlet and directing the product
  flow either right or left port
• Carbon steel or stainless steel
• Optional cavitation control trim

• Sizes 2-1/2", 3", and 4"
• Available in carbon steel 316 stainless steel
• Special alloys available upon request
• Three piece body blow out proof stem
• Inline reparable
• Live loaded stem seals
• Available in NPT, socket weld and butt weld ends
• Integral mounting pad

800WOG, NPT THREADED ENDS, WITH LOCKING HANDLE

• ISO 9002
• The thread ends conform to ASME B 1.20.1(NPT) ISO 228/1 &
  ISO 7/1 DIN 2999 & BS21
• Investment casting
• Blow-out proof stem
• Reduced port
• 800 psi WOG
• 15% glass fiberfill PTFE reinforced seat
• PTFE seal & packing
• Locking handle

1000WOG, NPT THREADED ENDS, WITH ISO DIRECT
MOUNTING PAD AND LOCKING HANDLE

• ISO 9002
• The thread ends conform to ASME B 1.20.1(NPT)
• Investment casting
• Blow-out proof stem
• Full port
• 1000 psi WOG
• 15% glass fiberfill PTFE reinforced seat
• Mounting pad refers to ISO 5211 & DIN 3337
• Latch lock handle

ANSI 150LBS, FLANGED ENDS, WITH LOCKING HANDLE

• ISO 9002
• The flange ends refers to ANSI B 16.5
• Face to face: ANSI B 16.10
• Wall thickness: ANSI B 16.34
• Investment casting up through 4"
• Blow-out proof stem
• Standard port
• 15% glass fiberfill PTFE reinforced seat
• PTFE seal & packing
• ISO mounting pad
• Locking handle

ANSI 150LBS, FLANGED ENDS, WITH LOCKING HANDLE

• ISO 9002
• The flange ends refers to ANSI B 16.5
• Face to face: ANSI B 16.10
  Wall thickness: ANSI B 16.34
• Investment casting up through 4"
• Blow-out proof stem
• Full port
• Class 150
• 15% glass fiberfill PTFE reinforced seat
• PTFE seal & packing
• ISO mounting pad
• Locking handle

1000WOG, L-PORT, NPT THREADED ENDS, WITH MOUNTING PAD
DRILLED AND TAPPED & LOCKING HANDLE

• ISO 9002
• The thread ends conform to ASME B 1.20.1 (NPT) DIN 2999 & BS21 ISO 228/1 & ISO 7/1
• Investment casting
• Standard port
• Blow-out proof stem
• 1000 psi WOG
• 15% glass fiberfill PTFE reinforced seat, seal & packing
• Mounting pad drilled & tapped
• L port
• Latch lock handle

ANSI 150 , L-PORT, FLANGED ENDS, WITH LOCKING HANDLE

• ISO 9002
• The flanged ends conform to ASME B 16.5 & DIN 2501
• Full port
• ANSI 150
• 15% glass fiberfill PTFE reinforced seat, seal & packing
• Blow-out proof stem
• L port
• Locking handle thru 3" size

• Three Piece Design
• Sizes 1/4 to 2 inch
• Reduced and Full port
• Meets A.N.S.I.B16.U
• Flanged to ANSI 900
• Optional N.A.C.E.
• 1/4"-1 "to 4500 psi WOG
• 1-1/2"-2" to 3000 psi WOG
• Locking Handle (optional)

• Sizes 1/4 to 3 inch
• Reduced & Full port
• Available in all bar stock metals
• Optional integral mounting top body is predrilled and tapped for actuation
• Massive heavy-duty valves designed for rugged high pressure service
• Locking handle (standard)

• ANSI Class 150-300 Full port
• Available in carbon steel or stainless steel body
• Special alloys available upon request
• API 607 certified
• SEAT MATERIAL: TFE,MTFE,RTFE, PEEK, and Stainless Steel
• Sizes 1/2 inch through 8 inch
• Optional NACE . ISO 5211 Mounting Pad
• Direct Mount Actuators

• Sizes 1/4 to 2 inch
• Uni-Directional
• Double bagged and sealed in 4 mil bags - polyethylene
• Optional "02 Cleaned"
• Available in NPT, SW, BW, Flanged - 150 and 300 ANSI
• Locking handle

• Sizes 1/2 to 2 inch (Side inlet available on request)
• Full port available on request
• 90 and 180 operations with blow out proof stem and enclosed body bolts
• Available in ends of NPT, SW, BW, and flanged to 300 Ib. ANSI
• Operation by utilizing the bottom inlet and directing the product flow either right or left port.
• Seat material: TFE, MTFE, RTFE, PEEK and stainless steel

• Sizes 2-1/2 through 6 inch
• Available in carbon steel and 316 stainless steel body
• Special alloys available upon request
• Fire safe API 607 N.A.C.E. certified
• Live loaded stem seals
• Wafer body ANSI 150
• Optional control seats
• Optional cavitation control trim

• NAMUR interface
• High switch reliability
• Balanced spool construction allows
  5/2 NAMUR valve to be converted
  to 3/2,
  one valve for all applications
• No matter the orientation, valve
  may be
  mounted in any position
• Aluminum anodized valve body