Valtorc International Ball Valves are a high performance solution to your industrial Ball Valve needs.  Valtorc ARRA Compliant Ball Valves are available in sizes ranging from ¼” to 12” in materials such as Carbon Steel, Stainless Steel, Brass, CPVC, PVC, and Cast Iron. Valtorc Ball Valves are also available in 2 Way or 3 Way configurations and are available in L Port and T Port flow patterns.  Available end connections include Threaded, Socket Weld, Butt Weld and Flanged.  If you do not see a Ball Valve that meets your specifications, please contact our sales staff to inquire about your Ball Valve requirements.  If you are looking for the Valtorc valves installation, maintenance and instructions PDF click here.

1500 PSI 2-Piece Standard Port Series 25 Ball Valves

Features:

• Steam rating: 150 psi WSP
• Blow-out-proof stem design
• ISO 5211 Mounting Pad
• Body: ASTM A351 Gr.CF8M / ASTM A216 Gr. WCB
• Ball Valve: SS316
• Stem: SS316
• Seat: Reinforced Teflon
• End Connections: Threaded End
• Working Pressure: 1/4"-1" 2000 psi; 11/4"-3 " 1500 psi
• Temperature Range: -50°to 450° F
• TEST STANDARD: API 598
• Vacuum Service to 29" Hg
• Threaded Type: ANSI B1.20.1 (NPT); DIN 259/DIN 2999, ISO 228, BSP, PT

High Performance Compression End Series 50 Ball Valves

Features:

• 1/4" - 1" (inches) Ball Valves sizes available - High Performance Ball Valves
• 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
• Fire safe to API 607 4th Edition & ISO 10497
• ISO 5211 4-Bolt actuator mounting pad
• NACE MR01-75 Rev 2000 compliant
• Standard 304SS latch lock handles
• Standard ASTM A193 grade B8 stainless bolts
• TFM seats provide superior high temperature performance and chemical resistance
• PEEK seats and seals available

Series 100 Threaded End Ball Valves

Features:

• 1/4" - 2" (inches) Ball Valves sizes available
• Steam rating: 125 PSI WSP
• Blow-out-proof stem design
• Padlocking device
• Body: ASTM A351 Gr.CF8M
• Stem: SS316
• Seat: PTFE
• End Connections: Threaded End Ball Valves
• Working Pressure: 1000 PSI
• Temperature Range: -50° to 400° F
• TEST STANDARD:API598
• Vacuum Service to 29" Hg
• Threaded Type: ANSI B 1.20.1 (NPT), DIN 259/DIN 2999, IS0 228, BSP, PT

Series 101 Full Port 2 Piece Ball Valves

Features:

• Available in sizes from 1/4" - 2"
• Steam rating: 150 psi WSP
• WORKING PRESSURE: 2000 PSI
• INVESTMENT CASTING BODY & CAP
• PTFE SEAL KITS: REPLACES PTFE ,RPTFE AND FPA
• LOW DEFORMATION UNDER LOAD; LOW PERMEATION
• TEMPERATURE RATING: -45.5oC (-50°F) to 246oC (475 °F)
• ADJUST ABLE STEM PACKING
• BLOW-OUT PROOF STEM;LOCKING DEVICE
• DESIGN SPECIFICATION: ANSI B 16.34 CLASS 900
• TEST ST ANDARD:API 598; Vacuum Service to 29" Hg
• NACE MR-0175 FULL COMPLIANCE

Series 102 Reduced Port 1 Piece WOG Ball Valves

Features:

• Available in sizes from 1/4" - 2"
• Steam rating: 125 psi WSP
• NACE MR-0175 full compliance
• Body: ASTM A351 Gr.CF8M
• Stem: SS316; Seat: PTFE
• End Connections: Threaded End
• Working Pressure: 2000 psi; Temperature Range: -50° to 400o F
• TEST STANDARD:API 598; Vacuum Service to 29" Hg
• Threaded Type: ANSI B 1.20.1 (NPT), DIN 259/DIN 2999, ISO 228, BSP, PT

Series 103 Reduced Port 1 Piece WOG Ball Valves

Features:

• Available in sizes from 1/4" - 4"
• Steam rating: 150 psi WSP
• Blow-out-proof stem design
• Temperature Range: -50 •p to 450 •p
• Options: locking device
• TEST ST ANDARD:API 598
• Vacuum Service to 29" Hg
• NACE MR-0175 FULL COMPLIANCE
• Threaded Type: ANSI B 1.20.1 (NPT), DIN 259/DIN 2999, ISO 228, BSP, PT

Series 110 Threaded End Ball Valves

Features:

• 1/4" - 4" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• Blow-out-proof stem design
• Body: ASTM A351 Gr.CF8M
• Ball: SS316
• Stem: SS316
• Seat: Reinforced Teflon
• End Connections: Threaded End Ball Valves
  
• Working Pressure: 1000 PSI
• Temperature Range: -50° to 450° F
• Options: Padlocking device
• Tapping for Actuator
• TEST STANDARD:API 598
• Vacuum Service to 29" Hg

Series 115 Full Port 2000 PSI WOG Ball Valves

Features:

• 1/4" - 2" (inches) Ball Valves sizes available
• Steam Rating:  150PSI WSP
• Working Pressure:  2000PSI
• Investment Casting Body and Cap
• PTFE Seal Kits Available
• Temperature Rating: -45C to 246C
• Long Cycle Life
• Adjustable Stem Packing
• Blow-Out Proof Stem
• Designed Specs: ANSI b16.34 Class 900

Series 120 Threaded End Ball Valves

Features:

• 1/4" - 2" (inches) Ball Valves sizes available
• Steam rating:250 PSI WSP
• Blow-out-proof stem design
• ISO 5211 Mounting Pad
• Body: ASTM A351 Gr.CF8M
• Ball: SS316
• Stem: SS316
• Seals: CGT (CARBON and GRAPHITE Reinforced PTFE
• Seats, seals and Packings)
• End Connections: Threaded End Ball Valves
  
• Working Pressure: 1/4"-1" 2000 PSI
• Temperature Range: -50° to 500°F
• Padlocking device
• TEST STANDARD:API598
• Vacuum Service to 29" Hg
• Threaded Type: ANSI B 1.20.1 (NPT), DIN 259/DIN 2999, ISO 228, BSP,PT

Series 130 High Peformance Ball Valves

Features:

• 1/4" - 4" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• Blow-out-proof stem design
• ISO 5211 Mounting pad
• Body: ASTM A351 Gr.CF8M
• Ball: SS316 - Stem: SS 316
• Seat: Reinforced Teflon
• End Connections: Threaded End, Socket Weld End, Butt Weld End Ball Valves
  
• Working Pressure: 1000 PSI
• Temperature Range: -50° to 450 °F
• TEST STANDARD:API598
• Vacuum Service to 29" Hg
• Options: Padlocking device

Series 140 Direct Mount Ball Valves

Features:

• 1/2" - 4" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• Working Pressure : 1000 PSI
• INVESTMENT CASTING BODY & CAP
• PTFE SEAL KITS : REPLACES PTFE,RPTFE AND FPA, LOW DEFORMATION UNDER LOAD, LOW PERMEATION
• Temperature Rating : -45.5° C (-50'F) to 246'C (475)
• LONG CYCLE LIFE
• BLOW - OUT- PROOF STEM
• ANTI - STATIC DEVICE
• ADJUSTABLE STEM PACKING, HANDLE WITH LOCKING DEVICE
• FULL ISO-5211 PAD FOR DIRECT MOUNT AUTOMATION
• Test Standard: API 598
• Vacuum Service to 29" Hg
• End Connections: Threaded End Ball Valves
  

Series 150 Sanitary Ball Valves

Features:

• Same Valtorc Valve as Series 500-SN
  
• 1/2" - 4" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• Working Pressure : 1000 PSI
• INVESTMENT CASTING BODY & CAP
• PTFE SEAL KITS : REPLACES PTFE,RPTFE AND FPA, LOW DEFORMATION UNDER LOAD, LOW PERMEATION
• Temperature Rating : -45.5° C (-50'F) to 246'C (475)
• PTFE Cavity Filler's OPTIONAL
• LONG CYCLE LIFE, BLOW - OUT- PROOF STEM
• ANTI - STATIC DEVICE
• ADJUSTABLE STEM PACKING
• HANDLE WITH LOCKING DEVICE
• FULL ISO-5211 PAD FOR DIRECT MOUNT AUTOMATION
• Test Standard: API 598
• Vacuum Service to 29" Hg
• End Connections: Sanitray End Ball Valves
  

Series 160 Direct Mount Ball Valves

Features:

• 1/2" - 2" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• Working Pressure : 2000 PSI
• INVESTMENT CASTING BODY & CAP
• PTFE SEAL KITS : REPLACES PTFE,RPTFE AND FPA, LOW DEFORMATION UNDER LOAD, LOW PERMEATION
• Temperature Rating : -45.5° C (-50'F) to 246'C (475)
• LONG CYCLE LIFE
• BLOW - OUT- PROOF STEM
• ANTI - STATIC DEVICE, ADJUSTABLE STEM PACKING
• HANDLE WITH LOCKING DEVICE
• FULL ISO-5211 PAD FOR DIRECT MOUNT AUTOMATION
• Test Standard: API 598
• Vacuum Service to 29" Hg
• End Connections: Threaded End Ball Valves

Series 165 Cast Iron Ball Valves

Features:

• Epoxy Coated Cast Iron Body.
• Stainless Steel Solid Ball.
• Same end-to-end as any flanged gate or plug valve.
• Tapped & plugged boss allows for venting downstream, or test port for backflow preventer.
• 2" through 8" - Full Port.
• Rated 200W @ 200ºF.
• Class VI Positive Shutoff.
• Low Torque.
• Ideal for Liquid, Air, and Backflow applications.

Series 170 Industrial Ball Valves

Features:

• 1" - 6" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• ISO 5211 Actuator Mounting Pad Blow - out - proof stem design
• Anti - Static device
• Adjustable Stem Packing Locking Device
• Body:ASTM A351 Gr.CF8M
• ASTM A216 Gr. WCB
• PTFE SEAL KITS : REPLACES PTFE,RPTFE AND FPA
• LOW DEFORMATION UNDER LOAD
• LOW PERMEATION
• Temperature Rating: -45.5 C (-50°F) to 246 °C (475 °F)

Series 180 (150# and 300#) Ball Valves

(150#)

(300#)

Features:

• 1/2" - 8" (inches) Ball Valves sizes available
• Steam rating:150 PSI WSP
• ISO 5211 Actuator Mounting Pad Blow-out-proof stem design
• Anti - Static Device
• Body: ASTM A351 Gr.CF8M Ball: SS316 Stem: SS316
• PTFE SEAL KITS : REPLACES PTFE,RPTFE AND FPA, LOW DEFORMATION, UNDER LOAD , LOW PERMEATION
• Temperature Rating: -45.5 'C (-50°F) to    246'C (475'F)
• Face to Face: ANSI B16.10
• Flange Dimensions: ANSI B16.5
• TEST STANDARD:API 598
• Vacuum Service to 29" Hg

Series 180-GO Full Port Flanged Ball Valves

Features:

• Full Port Ball Valve
• Flanged Connecting Ends
  
• Face to Face:  ANSI B16.10
• Flange Dimension:  ANSI B16.5
• Wall Thickness:  ANSI B16.34
• Test Standard:  API598
• Gear Operation
• Available in in 10" or 12" Ball Valves
• Durable, long lasting materials

Series 190 Ball Valves

Features:

• 1" - 4" (inches) Ball Valves sizes available
• Steam Rating: 150 PSI WSP
• Blow-Out-Proof Stem Design
• Anti - Static Device; Adjustable Stem Packing
• Locking Device
• PTFE SEAT KITS : REPLACES PTFE,RPTFE AND FPA, LOW DEFORMATION UNDER LOAD, LOW PERMEATION
• Temperature Rating :-45.5'C (-50'F) to 246C (475'F)
• FULL ISO-5211 PAD FOR DIRECT MOUNT AUTOMATION
• ANSI B16.5 B16.10 and B16.34 Full Compliance
• TEST STANDARD:API 598
• API 607 51h Edition FIRE SAFE APPROVAL
• Vacuum Service to 29" Hg

Series 195 Full Port Flanged Ball Valves (Class 150/300/600)

Features:

• Steam rating: 150 psi WSP
• ISO 5211 Actuator Mounting Pad
• Blow-out-proof stem design
• Anti - Static Ball Valve
• Adjustable Stem Packing Locking Device
• Ball Valve Body: ASTM A351 Gr.CF8M For Series 410, ASTM A216 Gr.
• Temperature Rating: -45.5'C (-50° F) to 246 C° (475°F) Long Cycle Life, ANSI B16.5, B16.10 and B16.34; Full Compliance
• API 607 4thEdition FIRE SAFE APPROVAL

Series 200 High Peformance Ball Valves

Features:

• 1/4" - 2" (inches) Ball Valves sizes available
• Steam Rating:  150 PSI WSP
• Working Pressure:  1000 PSI
• Investment Casting Body & Cap:  Replaces PFTE, RPTFE and FPA, Low
• Pressure Deformation Under Load, Low Permeation
• Temperature Rating -45.5C (-50F) to 246C (475F)
• Full ISO-5211 Pad For Direct Mount Automation
• Handle with Locking Device
• Blow - Out - Proof Stem
• Anti-Static Device; Long Cycle Life
• Test Standard: API 598
• End Connections:  Threaded End
  

Series 210 3-Way Ball Valves

(3-Way Flow Plan)

Features:

• Click here to download the Multi Port Flow Pattern PDF
  
• 2" - 6" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• Blow-out-proof stem design
• ISO 5211 Actuator Mounting Pad
• Body: ASTM A351 Gr.CF8M
• Ball: SS316
• Stem: SS316
• Seat: PTFE
• Temperature Range: -50 to 450 F Multiport design
• Flange Dimensions: ANSI B 16.5
• TEST STANDARD:API 598

Series 220 Direct Mount Brass Ball Valves

Features:

• 1/4" - 4" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• WORKING PRESSURE: 1/4"-2": 600 PSI, 21/2"~4":400 PSI
• STEM & BALL: 1/4"-2" : Brass, 21/2"-4": Stainless Steel
• FULL ISO.5211 PAD FOR DIRECT MOUNT AUTOMATION
• TFE® SEATS AND SEALS; VITON® BODY 0-RINGS
• TRIPLE STEM SEAL DESIGN
• BLOW-OUT PROOF STEM
• ADJUSTABLE STEM PACKING
• TEMPERATURE RATING : -18'C (O'F) to 204°C (4001)
• Vacuum Service to 29" Hg

Series 231 3-Way Brass Ball Valves (L/T Port)

Features:

• Click here to download the Multi Port Flow Pattern PDF
  
• 1/4" - 3" (inches) Ball Valves sizes available
• Four Seats
• Pressure Rating:  400WOG - 100WSP
• Model 231-T Port (90 and 180 flow path)
• Model 231-L Port (90 with off position)
• Temperature to 3440
• Blow out proof stem, chrome plated brass ball
• PTFE seats with O-RING backing for low operating torque
• PTFE seats for double O-RING stem packing
• 100% electronically tested in the open and closed position at 80 PSI

Series 240 Spring Return Handle For Ball Valves

Features:

• Click here to download the Spring Return Handle PDF
• Two piece body / Full port
• NPT threads to ANSI B1.20.1
• Available in Flanged
• Stainless Steel and Carbon Steel Options
• Fire Safe Option Available
• Blowout-proof stem
• Adjustable packing nut
• Deadman handle
• 2000 P.S.I. W.O.G. 1/4" to 2" / 1500 P.S.I. W.O.G. 21/2" & 3"

Series 250 Industrial High Pressure Ball Valves

Features:

• Equal to Victaulic Brand
• 2" - 3" (inches) Ball Valves sizes available
• ASTM 316 stainless construction
• Reinforced teflon, 3-piece "chevron" style packing - expands outward as it is compressed to seal
• Victaulic style grooved connections
• High quality investment cast body and end caps
• Designed for quick disconnect service
• 100% air tested underwater at the factory
• Blowout proof stem design
• Locking handle is standard
• Options: 3" in 8" or 10" length

Series 270 Industrial High Pressure Ball Valves

Features:

• 1/4" - 2" (inches) Ball Valves sizes available
• Investment Cast 316 stainless steel construction
• 3-PC lug style body design facilitates inspection
• Easy inline repair
• Full port flow with self contained center section
• Blow out proof, bottom entry stem design
• Mounting Pad
• Suitable for water borne paint applications
• Working pressure to 2000 PSI W.O.G.

Series 280 Industrial Multi Port-Ball Valves

Features:

• Click here to download the Multi Port Flow Pattern PDF
  
• 1/2" - 4" (inches) Ball Valves sizes available
• Sizes 5" - 12" (inches) click here for spec sheet PDF.
• Available in 316 stainless steel
• Full port design
• Strong industrial design and body
• ISO 5211 mounting pad
• (sizes 1/2”-4” are direct mounting)
• Investment cast and sand cast body construction
• Meets International Standards
• 150# ANSI Flanged ends
• L or T Port Ball Valve Design

Series 285 Multi Port Flanged Ball Valves

Features:

• Click here to download the Multi Port Flow Pattern PDF
• Investment casting: 1/2" to 12" both in CF8M & WCB
• Sand casting: 6" to 8" both in CF8M & WCB
• Available in stainless steel or carbon steel with ISO 5211 direct mounting pad (1/2" to 4")
• Adjustable stem packing
• Available in L/ T/ X/ I-port
• Available in 3/ 4/ 5-way in block body type.
• 100% air tested under water at 80-100 psi
• Temperature range -20 F to 450 F
• End connection: ASME150/ 300 & PN16/ 40
• Available with locking function

Series 290 Industrial Direct Mount Multi-Port Ball Valves

Features:

• Click here to download the Multi Port Flow Pattern PDF
  
• 1/2" - 4" (inches) Ball Valves sizes available
• ISO 5211 Direct mount pad. Allows direct mounting of pneumatic and electric actuators, no brackets and couplings needed, easy and low cost for automated service.
• Full Port, Multi port design :L&T port flow design available
• Live loaded stem packing
• Blow out proof stem, floating ball design
• Cost efficient. One valve can replace two or more valves, reduces the number of valves in piping system.
• Anti-static device
• Investment cast body construction
• 1000 PSI W.O.G.

Series 295 Flanged Standard Port Ball Valves

Features:

• 1" - 8" (inches) Ball Valves sizes available
• ISO 5211 Direct mount pad. Allows direct mounting of pneumatic and electric actuators, no brackets and couplings needed, easy and low cost for automated service.
• Full Port, Multi port design :L&T port flow design available
• Blow out proof stem, floating ball design
• Anti-static device
• Investment cast body construction
• Class 150
• Locking Device

Series 300 Two Piece Trunnion Mounted Ball Valves

Features:

• Anti blowout stem permit the replacement of the stem seals with the Ball Valve in the full closed or open position.
• Two independent floating seat rings assure the bi-directional tightness of the valve from  zero  differential  pressure  to  the maximum rated pressure.
• When the Ball Valve body cavity pressure exceeds the down stream seat spring preloaded force, the differential force in the cavity area   pushes the downstream seat away from the ball, the body cavity pressure will automatically  relived.  And  then  seat returns to the ball under spring loaded action.
• The ball is fixed and the seat rings are floating, free to move along the valve axis. As the pressure increases the fluid pressure pushes the seat rings against the ball.
• The electric conductance between all the metallic components of this series Ball Valve.

Series 310 Three Piece Trunnion Mounted Ball Valves

Features:

• Three Piece Trunnion Mounted Ball Valves Made in the USA
• A resilient material is inserted into the metal seat holder to provide a soft action in addition to the metal sealing between the ball and  the seat rings. In case of fire soft insert goes burnt and spring  loaded seats insure metal to metal sealing.
• The stem seal integrity is achieved by the use of two O-rings And one graphite gasket, retained by gland ensure the stem Seal.
• An emergency sealant injection system is available on request for 6” and above Ball Valves. Each Ball Valve has port for sealant injection feature.
• The double body seals O-rings and fire safe graphite gasket in all static joints of the body components ensures protection against external leakage and fugitive emission requirements.
• Independent upstream and down stream seats permit raining of fluids from the body cavity, allowing double block and bleed operation.

Series 340 3000# Seal Weld Ball Valves

Features:

• Seal weld construction Ball Valve
• ASTM A351 CF8M; ASTM a216 WCB
• Rating of 3000 CWP
• NACE MR-01-75 complaint
• API 608
• Locking device handle
• Blowout proof Ball Valve stem
• Anti static Ball Valve device
• Mounting pad
• Live loaded stem

Series 350 6000# Seal Weld Ball Valves

Features:

• Seal weld construction Ball Valve
• ASTM A351 CF8M; ASTM a216 WCB
• Rating of 6000 CWP
• NACE MR-01-75 complaint
• API 608
• Locking device handle
• Blowout proof Ball Valve stem
• Anti static Ball Valve device
• Mounting pad
• Live loaded stem

Series 360 High Pressure Ball Valves

Features:

• ASME B16.34 Design
• NACE MR0175 Compliance
• Blow-out Proof, Heavy-duty Valve Stem
• Anti-static Ball Valve Configuration
• Live-loaded Stem Seals
• Fully Encapsulated Body Seals
• Integral Mounting Pad; Locking Handle
• Slotted Seat Design
• Choice of Seats and Seals
• Floating Ball Valve Design

Series 370 Metal Seated Ball Valves

Features:

• Ball Valve configuration includes the standard metal seat with polymeric seat seals, body seals and stem packing.
• It is intended for use in highly abrasive or erosive applications where higher temperatures are not an issue.
• The service temperature limitfor this configuration is 450°F (232.2°C).
• In this metal seat configuration the polymeric seals are replaced with die-formed flexible graphite seat seals and stem packing.
• The Ball Valve body seal is spiral wound SS316/flexible graphite; die-formed flexible graphite.
• Temperature capability of the metal seated valves to 600°F (316°C), while retaining resistance to abrasion and erosion.

Series 380 Cryogenic Ball Valves

Features:

• Equalizes valve cavity pressure and line pressure in openposition.
• Provides long intervals between stem packing adjustments, decreasing emissions through the packing.
• Provides easy identification of valve position
• Ready to use in critical applications
• Keeps the Ball Valve in Factory-new condition until it is to be installed.
• Positions stem and stem packing away from cryogenic fluid to prevent stem seal freeze-up and to ensure emission-free service.
• 1/2” - 2-1/2” Standard Port, 1/2” - 2” Full Port, Meet wall thickness requirement of ANSI B 16.34 for class 600, 3” - 4”
• Standard Port Class 300, and 2-1/2” - 3” Full Port Class 300.
• In-line serviceable swing-out center section allows easy access to internal valve components without disturbing alignment of pipe.
• Prevents accidental removal of stem under pressure.
• Self adjusts with pressure and temperature fluctuations. Bottom entry system helps prevent accidents and injuries

Series 390 Flush Bottom Tank Ball Valves

Features:

• Machined from 316L stainless steel. Eliminates porosity and flaws commonly associated with cast materials. Increases resistance to corrosion.
• Allows ball to extend into tank resulting in reduced dead space where media may accumulate.
• Ball Valves and their corresponding pads are available in full and standard port pipe dimensions or full port tube dimensions, assuring proper sizing of piping system.
• Allows pad to be directly welded to tank without disassembly of the Ball Valve.
• Ideal for actuation. Centering lip feature assures precise alignment of bracket stem and coupler. Allows in-line maintenance of valve without having to remove actuator.

Series 420 Brass Ball Valves (Locking Handle)

Features:

• Full Port, Forged Brass, Two Piece Body Brass Ball Valve
• Teflon Seats
• Blow-Out Proof Stem
• Chrome Plated SolidBrass Ball
• Available in Thread Ends and Socket Weld Ends
  
• Conforms to MSS-SP-110
• 1/4” -2” Rated: 600 PSI Non-ShockCWP-150 PSI SWP
• 2-1/2” -4” Rated: 400 PSI Non-ShockCWP-100 PSI SWP
• CSA Gas Approved to 2” (IPSOnly)
• Commercial & Light Industrial/ Steam, Water, Oil, Gas, Air

Series 430/435 (Stainless Steel or Carbon Steel) 3-Way Ball Valves

Features:

• Available in sizes from 1/4” – 1”
• Block Body; Full Port
• NPT – ORB Connections
• Delrin Ball Seats
• Black Oxide Coating
• Nickel Plated Ball
• Viton O Rings
• Temperature range -20F to 215F
• Available in Stainless Steel and Carbon Steel
  

Series 440 High Performance Ball Valves

Features:

• Available Sizes:  1/2" - 2"
• Valve construction & thickness follow ANSIB16.34
• Full port design with ISO 5211 direct mounting pad
• Adjustable stem packing
• Available in stainless steel or carbon steel
• Blow-out proof stem design
• 100% air tested under water at  80-100 psi
• End type: Class 600 & Class  900
• Working pressure: TFM seat: 1/2"~2", Class 900  (2160 psi);DELRIN/ PEEK
• Seat: 2-1/2"~4", Class 900

 Series 445 Multi-Port 3000PSI Ball Valves

Features:

• Click here to download the Multi Port Flow Pattern PDF
  
• Available Sizes:  1/4” - 2”
• Construction design follow ASME B16.34 standard
• Available in stainless steel or carbon steel with ISO 5211 direct mounting pad
• Blow-out proof stem design
• Available in L/ T/ X/ I-port
• Trunnion and Full bore design; available in 3/4 way in block body type.
• 100% air tested under water at    80-100 psi
• Temperature range -20 F to 450 F
• End type: thread/ socket weld/ butt weld

Series 450 Class 1500/2500 Socket Weld, Forged Steel Ball Valves

(Download the Class 1500/3600PSI Version PDF)

(Download the Class 2500/6000PSI Version PDF)

Features:

• Available in sizes:  1/4" - 2"
• Forged steel body construction secures Class 1500/3600 PSI (and Class 2500/6000 PSI) working pressure rating.
• LF2 valve body & end caps for low-temperature applications.
• Special design of extended socket weld end facilitates heat dissipation during welding.
• No prior disassembly of valve is required therefore welding installation process is shortened.
• Use of body O-ring and body joint gasket double secures NO LEAKAGE.
• Live-loaded packing gland for self-adjustment of stem packing compression.
• Rugged lockable lever handles for safety and long service life.

Series 520-SN Sanitary 3-Way Ball Valves

Features:

• Click here to download the Multi Port Flow Pattern PDF
• 1" - 2" (inches) Ball Valves sizes available
• Balanced 4-Seat or 5-Seat Construction
• Unlike two-seated diverter valves and other multi-port valves on the market, the 520-SN series has four seats (five seats in bottom entry valves) for positive shut-off in the closed position.
• Provides engineers greater design flexibility
• ISO 5211 Mounting Pad
• High-Cycle, Live-Loaded Stem Packing Dynamic loading on stem packing ensures a tight seal through varying pressure and temperature conditions, extending service life and reducing maintenance costs
• Blow-Out-Proof Stem - Stem is bottom loaded to prevent removal when valve is in service
• Full Port Design - Full port construction improves flow characteristics for greater process efficiencie

Kingston Performance Ball Valves

Features:

• Kingston Valves Sizes Available 1/2" - 3"
• Investment Cast Components
• Quick Installation / Various Sizes Available
• No Lubrication Required for Life of the Ball Valves
• Compact Ball Valves
• Quarter Turn On/Off Ball Valves
• Full Size Ports – Minimum Pressure Drop
• Quick In-Line Maintenance
• Two-Way Flow – Eliminates Danger of Improper Installation
• Air Under Water @ 100PSI - Open and Closed Positions

Please note:   Due to continuous development of our product range, we reserve the right to change the dimensions, pictures and information contained on our website and product catalogs.  Furthermore, due to our growing inventory, development and design of new products our online catalog may not show models that have just been released. If you do not see a particular product on this page that you need, call our sales team at 1-866-VALTORC or locally at 770-423-7100 for an immediate quote and assistance.