Valtorc International Ball Valves are a high performance solution to your industrial Ball Valve needs.  Valtorc ARRA Certified Ball Valves are available in sizes ranging from ¼” to 12” in materials such as Carbon Steel, Stainless Steel, Brass, CPVC, PVC, and Cast Iron. Valtorc Ball Valves are also available in 2 Way or 3 Way configurations and are available in L Port and T Port flow patterns.  Available end connections include Threaded, Socket Weld, Butt Weld and Flanged.  If you do not see a Ball Valve that meets your specifications, please contact our sales staff to inquire about your Ball Valve requirements.  If you are looking for the Valtorc valves installation, maintenance and instructions PDF click here.

Kingston Performance Ball Valves

Features:

• Investment Cast Components
• Quick Installation / Various Sizes Available
• No Lubrication Required for Life of the Ball Valves
• Compact Ball Valves
• Quarter Turn On/Off Ball Valves
• Full Size Ports – Minimum Pressure Drop
• Quick In-Line Maintenance
• Two-Way Flow – Eliminates Danger of Improper Installation
•  Air Under Water @ 100PSI - Open and Closed Positions

1500 PSI 2-Piece Standard Port Ball Valves

Features:

• Steam rating: 150 psi WSP
• Blow-out-proof stem design
• ISO 5211 Mounting Pad
• Body: ASTM A351 Gr.CF8M / ASTM A216 Gr. WCB
• Ball Valve: SS316
• Stem: SS316
• Seat: Reinforced Teflon
• End Connections: Threaded End
• Working Pressure: 1/4"-1" 2000 psi; 11/4"-3 " 1500 psi
• Temperature Range: -50°to 450° F
• TEST STANDARD: API 598
• Vacuum Service to 29" Hg
• Threaded Type: ANSI B1.20.1 (NPT); DIN 259/DIN 2999, ISO 228, BSP, PT

High Performance Compression End Series 50 Ball Valves

Features:

• 1/4" - 1" (inches) Ball Valves sizes available - High Performance Ball Valves
• 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
• Fire safe to API 607 4th Edition & ISO 10497
• ISO 5211 4-Bolt actuator mounting pad
• NACE MR01-75 Rev 2000 compliant
• Standard 304SS latch lock handles
• Standard ASTM A193 grade B8 stainless bolts
• TFM seats provide superior high temperature performance and chemical resistance
• PEEK seats and seals available

Series 100 Threaded End Ball Valves

Features:

• 1/4" - 2" (inches) Ball Valves sizes available
• Steam rating: 125 PSI WSP
• Blow-out-proof stem design
• Padlocking device
• Body: ASTM A351 Gr.CF8M
• Stem: SS316
• Seat: PTFE
• End Connections: Threaded End Ball Valves
• Working Pressure: 1000 PSI
• Temperature Range: -50° to 400° F
• TEST STANDARD:API598
• Vacuum Service to 29" Hg
• Threaded Type: ANSI B 1.20.1 (NPT), DIN 259/DIN 2999, IS0 228, BSP, PT

Series 110 Threaded End Ball Valves

Features:

• 1/4" - 1" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• Blow-out-proof stem design
• Body: ASTM A351 Gr.CF8M
• Ball: SS316
• Stem: SS316
• Seat: Reinforced Teflon
• End Connections: Threaded End Ball Valves
  
• Working Pressure: 1000 PSI
• Temperature Range: -50° to 450° F
• Options: Padlocking device
• Tapping for Actuator
• TEST STANDARD:API 598
• Vacuum Service to 29" Hg

Series 120 Threaded End Ball Valves

Features:

• 1/4" - 3" (inches) Ball Valves sizes available
• Steam rating:250 PSI WSP
• Blow-out-proof stem design
• ISO 5211 Mounting Pad
• Body: ASTM A351 Gr.CF8M
• Ball: SS316
• Stem: SS316
• Seals: CGT (CARBON and GRAPHITE Reinforced PTFE
• Seats, seals and Packings)
• End Connections: Threaded End Ball Valves
  
• Working Pressure: 1/4"-1" 2000 PSI
• Temperature Range: -50° to 500°F
• Padlocking device
• TEST STANDARD:API598
• Vacuum Service to 29" Hg
• Threaded Type: ANSI B 1.20.1 (NPT), DIN 259/DIN 2999, ISO 228, BSP,PT

Series 130 High Peformance Ball Valves

Features:

• 1/4" - 4" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• Blow-out-proof stem design
• ISO 5211 Mounting pad
• Body: ASTM A351 Gr.CF8M
• Ball: SS316 - Stem: SS 316
• Seat: Reinforced Teflon
• End Connections: Threaded End, Socket Weld End, Butt Weld End Ball Valves
  
• Working Pressure: 1000 PSI
• Temperature Range: -50° to 450 °F
• TEST STANDARD:API598
• Vacuum Service to 29" Hg
• Options: Padlocking device

Series 140 Direct Mount Ball Valves

Features:

• 1/2" - 4" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• Working Pressure : 1000 PSI
• INVESTMENT CASTING BODY & CAP
• ME-PTFE SEAL KITS : REPLACES PTFE,RPTFE AND FPA, LOW DEFORMATION UNDER LOAD, LOW PERMEATION
• Temperature Rating : -45.5° C (-50'F) to 246'C (475)
• LONG CYCLE LIFE
• BLOW - OUT- PROOF STEM
• ANTI - STATIC DEVICE
• ADJUSTABLE STEM PACKING, HANDLE WITH LOCKING DEVICE
• FULL ISO-5211 PAD FOR DIRECT MOUNT AUTOMATION
• Test Standard: API 598
• Vacuum Service to 29" Hg
• End Connections: Threaded End Ball Valves
  

Series 150 Sanitary Ball Valves

Features:

• 1/2" - 4" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• Working Pressure : 1000 PSI
• INVESTMENT CASTING BODY & CAP
• ME-PTFE SEAL KITS : REPLACES PTFE,RPTFE AND FPA, LOW DEFORMATION UNDER LOAD, LOW PERMEATION
• Temperature Rating : -45.5° C (-50'F) to 246'C (475)
• LONG CYCLE LIFE, BLOW - OUT- PROOF STEM
• ANTI - STATIC DEVICE
• ADJUSTABLE STEM PACKING
• HANDLE WITH LOCKING DEVICE
• FULL ISO-5211 PAD FOR DIRECT MOUNT AUTOMATION
• Test Standard: API 598
• Vacuum Service to 29" Hg
• End Connections: Sanitray End Ball Valves
  

Series 160 Ball Valves

Features:

• 1/2" - 2" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• Working Pressure : 2000 PSI
• INVESTMENT CASTING BODY & CAP
• ME-PTFE SEAL KITS : REPLACES PTFE,RPTFE AND FPA, LOW DEFORMATION UNDER LOAD, LOW PERMEATION
• Temperature Rating : -45.5° C (-50'F) to 246'C (475)
• LONG CYCLE LIFE
• BLOW - OUT- PROOF STEM
• ANTI - STATIC DEVICE, ADJUSTABLE STEM PACKING
• HANDLE WITH LOCKING DEVICE
• FULL ISO-5211 PAD FOR DIRECT MOUNT AUTOMATION
• Test Standard: API 598
• Vacuum Service to 29" Hg
• End Connections: Threaded End Ball Valves
  

Series 170 Industrial Ball Valves

Features:

• 1" - 6" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• ISO 5211 Actuator Mounting Pad Blow - out - proof stem design
• Anti - Static device
• Adjustable Stem Packing Locking Device
• Body:ASTM A351 Gr.CF8M
• ASTM A216 Gr. WCB
• ME-PTFE SEAL KITS : REPLACES PTFE,RPTFE AND FPA
• LOW DEFORMATION UNDER LOAD
• LOW PERMEATION
• Temperature Rating: -45.5 C (-50°F) to 246 °C (475 °F)

Series 180 (150# and 300#) Ball Valves

(150#)

(300#)

Features:

• 1/2" - 8" (inches) Ball Valves sizes available
• Steam rating:150 PSI WSP
• ISO 5211 Actuator Mounting Pad Blow-out-proof stem design
• Anti - Static Device
• Body: ASTM A351 Gr.CF8M Ball: SS316 Stem: SS316
• ME-PTFE SEAL KITS : REPLACES PTFE,RPTFE AND FPA, LOW DEFORMATION, UNDER LOAD , LOW PERMEATION
• Temperature Rating: -45.5 'C (-50°F) to    246'C (475'F)
• Face to Face: ANSI B16.10
• Flange Dimensions: ANSI B16.5 
• TEST STANDARD:API 598
• Vacuum Service to 29" Hg

Series 190 Ball Valves

Features:

• 1" - 4" (inches) Ball Valves sizes available
• Steam Rating: 150 PSI WSP
• Blow-Out-Proof Stem Design
• Anti - Static Device; Adjustable Stem Packing
• Locking Device
• ME-PTFE SEAT KITS : REPLACES PTFE,RPTFE AND FPA, LOW DEFORMATION UNDER LOAD, LOW PERMEATION
• Temperature Rating :-45.5'C (-50'F) to 246C (475'F)
• FULL ISO-5211 PAD FOR DIRECT MOUNT AUTOMATION
• ANSI B16.5 B16.10 and B16.34 Full Compliance
• TEST STANDARD:API 598
• API 607 51h Edition FIRE SAFE APPROVAL
• Vacuum Service to 29" Hg

Series 200 High Peformance Ball Valves

Features:

• 1/4" - 2" (inches) Ball Valves sizes available
• Steam Rating:  150 PSI WSP
• Working Pressure:  1000 PSI
• Investment Casting Body & Cap:  Replaces PFTE, RPTFE and FPA, Low
• Pressure Deformation Under Load, Low Permeation
• Temperature Rating -45.5C (-50F) to 246C (475F)
• Full ISO-5211 Pad For Direct Mount Automation
• Handle with Locking Device
• Blow - Out - Proof Stem
• Anti-Static Device; Long Cycle Life
• Test Standard: API 598
• End Connections:  Threaded End, Socket-Weld, Butt-Weld End Ball Valves
  

Series 210 3-Way Ball Valves

(3-Way Flow Plan)

Features:

• 2" - 6" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• Blow-out-proof stem design
• ISO 5211 Actuator Mounting Pad
• Body: ASTM A351 Gr.CF8M
• Ball: SS316
• Stem: SS316
• Seat: PTFE
• Temperature Range: -50 to 450 F Multiport design
• Flange Dimensions: ANSI B 16.5
• TEST STANDARD:API 598

Series 220 Direct Mount Ball Valves

Features:

• 1/4" - 4" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• WORKING PRESSURE: 1/4"-2": 600 PSI, 21/2"~4":400 PSI
• STEM & BALL: 1/4"-2" : Brass, 21/2"-4": Stainless Steel
• FULL ISO.5211 PAD FOR DIRECT MOUNT AUTOMATION
• TFE® SEATS AND SEALS; VITON® BODY 0-RINGS
• TRIPLE STEM SEAL DESIGN
• BLOW-OUT PROOF STEM
• ADJUSTABLE STEM PACKING
• TEMPERATURE RATING : -18'C (O'F) to 204°C (4001)
• Vacuum Service to 29" Hg

Series 230 3-Way Ball Valves

Features:

• 1/4" - 2" (inches) Ball Valves sizes available
• Steam rating: 150 PSI WSP
• WORKING PRESSURE: 1/2"-11/4": 600 PSI
• 1 1/2"-2"  :400 PSI; 1/2"-11/2 " FULL PORT
• 2" :STANDARD PORT
• STEM & BALL : BRASS Matieral
• WITH IS05211 DIRECT MOUNTING OF ACTUATORS
• TFE® SEATS AND SEALS
• VITON® BODY 0-RINGS
• TRIPLE STEM SEAL DESIGN
• BLOW - OUT- PROOF STEM
• ADJUSTABLE STEM PACKING
• TEMPERATURE RATING : -18°C (0°F) to 204°C (400°F)
• Vacuum Service to 29" Hg

Series 231 Ball Valves (L/T Port)

Features:

• 1/4" - 3" (inches) Ball Valves sizes available
• Four Seats
• Pressure Rating:  400WOG - 100WSP
• Model 231-T Port (90 and 180 flow path)
• Model 231-L Port (90 with off position)
• Temperature to 3440
• Blow out proof stem, chrome plated brass ball
• PTFE seats with O-RING backing for low operating torque
• PTFE seats for double O-RING stem packing
• 100% electronically tested in the open and closed position at 80 PSI

Series 240 Spring Return Handle For Ball Valves

Features:

• Adjustable Torque
• Encapsulated Spring for Safety
• Valve sizes: 1/4" to 2"
• All Stainless Steel
• Compatible with Valtorc Ball Valves

Series 250 Industrial Ball Valves

Features:

• Equal to Victaulic Brand
• 2" - 3" (inches) Ball Valves sizes available
• ASTM 316 stainless construction
• Reinforced teflon, 3-piece "chevron" style packing - expands outward as it is compressed to seal
• Victaulic style grooved connections
• High quality investment cast body and end caps
• Designed for quick disconnect service
• 100% air tested underwater at the factory
• Blowout proof stem design
• Locking handle is standard
• Options: 3" in 8" or 10" length

Series 260 Industrial Needle Valves

Features:

• 1/4" - 1" (inches) Ball Valves (Needle) sizes available
• High quality, investment cast body
• 316 stainless
• Threaded NPT ends
• High pressure 6000 PSI WOG
• Manufactured dry and silicone free for use
• In instrumentation and waterborne
• Paint applications

Series 270 Industrial High Pressure Ball Valves

Features:

• 1/4" - 2" (inches) Ball Valves sizes available
• Investment Cast 316 stainless steel construction
• 3-PC lug style body design facilitates inspection
• Easy inline repair
• Full port flow with self contained center section
• Blow out proof, bottom entry stem design
• Mounting Pad
• Suitable for water borne paint applications
• Working pressure to 2000 PSI W.O.G.

Series 280 Industrial Multi Port-Ball Valves

Features:

• 1/2" - 12" (inches) Ball Valves sizes available
• Available in 316 stainless steel
• Full port design
• ISO 5211 mounting pad
• (sizes 1/2”-4” are direct mounting)
• Investment cast and sand cast body construction
• Meets International Standards
• 150# ANSI Flanged ends
• L or T Port Ball Valve Design
  

Series 290 Industrial Direct Mount Multi-Port Ball Valves

Features:

• 1/2" - 4" (inches) Ball Valves sizes available
• ISO 5211 Direct mount pad. Allows direct mounting of pneumatic and electric actuators, no brackets and couplings needed, easy and low cost for automated service.
• Full Port, Multi port design :L&T port flow design available
• Live loaded stem packing
• Blow out proof stem, floating ball design
• Cost efficient. One valve can replace two or more valves, reduces the number of valves in piping system.
• Anti-static device
• Investment cast body construction
• 1000 PSI W.O.G.

Series 300 Two Piece Trunnion Mounted Ball Valves

Features:

• Anti blowout proof stem permit the replacement of the stem seals with the Ball Valve in the full closed or open position.
• Two independent floating seat rings assure the bi-directional tightness of the valve from  zero  differential  pressure  to  the maximum rated pressure.
• When the Ball Valve body cavity pressure exceeds the down stream seat spring preloaded force, the differential force in the cavity area   pushes the downstream seat away from the ball, the body cavity pressure will automatically  relived.  And  then  seat returns to the ball under spring loaded action.
• The ball is fixed and the seat rings are floating, free to move along the valve axis. As the pressure increases the fluid pressure pushes the seat rings against the ball.
• The electric conductance between all the metallic components of this series Ball Valve.

Series 310 Three Piece Trunnion Mounted Ball Valves

Features:

• Three Piece Trunnion Mounted Ball Valves Made in the USA
• A resilient material is inserted into the metal seat holder to provide a soft action in addition to the metal sealing between the ball and  the seat rings. In case of fire soft insert goes burnt and spring  loaded seats insure metal to metal sealing.
• The stem seal integrity is achieved by the use of two O-rings And one graphite gasket, retained by gland ensure the stem Seal.
• An emergency sealant injection system is available on request for 6” and above Ball Valves. Each Ball Valve has port for sealant injection feature.
• The double body seals O-rings and fire safe graphite gasket in all static joints of the body components ensures protection against external leakage and fugitive emission requirements.
• Independent upstream and down stream seats permit raining of fluids from the body cavity, allowing double block and bleed operation.

Series 320 Industrial Process Ball Valves

Features:

• Top Flange Ball Valves are designed as per EN ISO 5211 for direct mounting of actuators and gear operators. Top flange design provides easy access for adjustment of gland bolts when the Ball Valve is mounted with actuators.
• Design generally conforms to ASME B 16.34-2004 / API 6D / BS EN ISO 17292  (BS 5351); class150 & class 300;  DIN EN 12516.
• Ball Valve end-to-end dimensions as per ASME B 16.10/ API 6D.
• Body joint bolting is in ASTM A 193 B7 / ASTM A 194 2H material for carbon steel bodies and ASTM A 193 GR.B8/ASTM A 194 GR.8 material for stainless steel bodies.

Series 330 Industrial Floating Ball Valves

Features:

• Stem is back-seated and positively retained: cannot be removed with the valve in service
• Stem lube fitting and weather seal
• 316 Stainless Steel Ball for extended life and ease of operation
• Fire tested and certified to API 6FA and BS 6755 latest addition
• RTFE seats standard in class 150 & 300, Delrin seats standard in class 600, 900 and 1500
• Standard locking Ball Valve handle
• Conforms to NACE MR-01-75 standard with 316 stainless steel trim Available in both standard bore and full bore; Double stem flat design in-dicates ball position
• Ball Valves includes pressure equalization hole to prevent trapped pressure in body cavity in open position

Series 340 3000# Seal Weld Ball Valves

Features:

• Seal weld construction Ball Valve
• ASTM A351 CF8M; ASTM a216 WCB
• Rating of 3000 CWP
• NACE MR-01-75 complaint
• API 608
• Locking device handle
• Blowout proof Ball Valve stem
• Anti static Ball Valve device
• Mounting pad
• Live loaded stem

Series 350 6000# Seal Weld Ball Valves

Features:

• Seal weld construction Ball Valve
• ASTM A351 CF8M; ASTM a216 WCB
• Rating of 6000 CWP
• NACE MR-01-75 complaint
• API 608
• Locking device handle
• Blowout proof Ball Valve stem
• Anti static Ball Valve device
• Mounting pad
• Live loaded stem

Series 360 High Pressure Ball Valves

Features:

• ASME B16.34 Design
• NACE MR0175 Compliance
• Blow-out Proof, Heavy-duty Valve Stem
• Anti-static Ball Valve Configuration
• Live-loaded Stem Seals
• Fully Encapsulated Body Seals
• Integral Mounting Pad; Locking Handle
• Slotted Seat Design
• Choice of Seats and Seals
• Floating Ball Valve Design

Series 370 Metal Seated Ball Valves

Features:

• Ball Valve configuration includes the standard metal seat with polymeric seat seals, body seals and stem packing.
• It is intended for use in highly abrasive or erosive applications where higher temperatures are not an issue.
• The service temperature limitfor this configuration is 450°F (232.2°C).
• In this metal seat configuration the polymeric seals are replaced with die-formed flexible graphite seat seals and stem packing.
• The Ball Valve body seal is spiral wound SS316/flexible graphite in the Series M50; die-formed flexible graphite in the M84/M99.
• Temperature capability of the metal seated valves to 600°F (316°C), while retaining resistance to abrasion and erosion.

Series 380 Cryogenic Ball Valves

Features:

• Equalizes valve cavity pressure and line pressure in openposition.
• Provides long intervals between stem packing adjustments, decreasing emissions through the packing.
• Provides easy identification of valve position
• Ready to use in critical applications
• Keeps the Ball Valve in Factory-new condition until it is to be installed.
• Positions stem and stem packing away from cryogenic fluid to prevent stem seal freeze-up and to ensure emission-free service.
• 1/2” - 2-1/2” Standard Port, 1/2” - 2” Full Port, Meet wall thickness requirement of ANSI B 16.34 for class 600, 3” - 4”
• Standard Port Class 300, and 2-1/2” - 3” Full Port Class 300.
• In-line serviceable swing-out center section allows easy access to internal valve components without disturbing alignment of pipe.
• Prevents accidental removal of stem under pressure.
• Self adjusts with pressure and temperature fluctuations. Bottom entry system helps prevent accidents and injuries

Series 390 Flush Bottom Tank Ball Valves

Features:

• Machined from 316L stainless steel. Eliminates porosity and flaws commonly associated with cast materials. Increases resistance to corrosion.
• Allows ball to extend into tank resulting in reduced dead space where media may accumulate.
• Ball Valves and their corresponding pads are available in full and standard port pipe dimensions or full port tube dimensions, assuring proper sizing of piping system.
• Allows pad to be directly welded to tank without disassembly of the Ball Valve.
• Ideal for actuation. Centering lip feature assures precise alignment of bracket stem and coupler. Allows in-line maintenance of valve without having to remove actuator.

Series 410 Ball Valves (150#)

Features:

• Steam rating: 150 psi WSP
• ISO 5211 Actuator Mounting Pad
• Blow-out-proof stem design
• Anti - Static Ball Valve
• Adjustable Stem Packing Locking Device
• Ball Valve Body: ASTM A351 Gr.CF8M For Series 410, ASTM A216 Gr.
• Temperature Rating: -45.5'C (-50° F) to 246 C° (475°F) Long Cycle Life, ANSI B16.5, B16.10 and B16.34; Full Compliance
• API 607 4thEdition FIRE SAFE APPROVAL

Series 420 Brass Ball Valves (Locking Handle)

Features:

• Full Port, Forged Brass, Two Piece Body Brass Ball Valve
• Teflon Seats
• Blow-Out Proof Stem
• Chrome Plated SolidBrass Ball
• Thread Ends Comply Per ANSI B2.1
• Conforms to MSS-SP-110
• 1/4” -2” Rated: 600 PSI Non-ShockCWP-150 PSI SWP
• 2-1/2” -4” Rated: 400 PSI Non-ShockCWP-100 PSI SWP
• CSA Gas Approved to 2” (IPSOnly)
• Commercial & Light Industrial/ Steam, Water, Oil, Gas, Air

Series 520-SN Sanitary 3-Way Ball Valves

Features:

• 1/2" - 2" (inches) Ball Valves sizes available
• Balanced 4-Seat or 5-Seat Construction
• Unlike two-seated diverter valves and other multi-port valves on the market, the 520-SN series has four seats (five seats in bottom entry valves) for positive shut-off in the closed position.
• Provides engineers greater design flexibility
• ISO 5211 Mounting Pad
• High-Cycle, Live-Loaded Stem Packing Dynamic loading on stem packing ensures a tight seal through varying pressure and temperature conditions, extending service life and reducing maintenance costs
• Blow-Out-Proof Stem - Stem is bottom loaded to prevent removal when valve is in service
• Full Port Design - Full port construction improves flow characteristics for greater process efficiencie

Series DGO Declutchable Gearbox Operator

Features:

• The Valtorc DGO Gear Operator is designed for use on butterfly valves, ball valves, and plug valves that utilize high pressure pneumatic actuators for operation.
• The Valtorc DGO Gear Operator is a de-clutchable operator for manually overriding the actuator.
• Small in volume, light weight, reasonable design and novel pattern.
• There are a range of sizes so the output torque matches the size of the pneumatic actuator and valve.
• There are two keyways 90° apart in the inner hole of the worm gear to allow for easy orientation of the valve.
• The gear operator is filled with special lubricant before leaving the factory. It is sealed after assembly providing dustproof and waterproof function and has a protection grade of IP65.
• The bottom of the gear operator should be connected with the valve and the bracket surface connected with the actuator. The valve stem coupling passes through the inner hole of the worm gear and the square end of the stem, which matches the square hole of the actuator.

Ball Valve Mounting Kits & Hardware

Features:

• Made with strong industrial stainless steel
• Stock ISO brackets
• Extended aluminum NAMUR brackets
• CNC processed
• Stem extensions available
• Positioner and Limit switch kits
• Locking devices
• Couplings
• Three-way tee assemblies

Please note: due to our growing inventory, development and design of new products our online catalog may not show models that have just been released. If you do not see a particular product on this page that you need, call our sales team at 1-866-VALTORC or locally at 770-423-7100 for an immediate quote and assistance.