Valve Blog and News

Valtorc Valve News and Industry Related News, How-To's and FAQ's

  • Home
    Home This is where you can find all the blog posts throughout the site.
  • Categories
    Categories Displays a list of categories from this blog.
  • Tags
    Tags Displays a list of tags that have been used in the blog.
Subscribe to this list via RSS Blog posts tagged in Training

Among the two most common types of rotary valves are the ball valves and butterfly valves. Both vales have a 90 degree turn and are mainly used to control the flow of gases and liquids. There are certain features which make the ball valves better than the butterfly valves.

For a start, a ball valve can give you the perfect seal. You will not expect any leakages when the valve is fully closed. The other amazing thing about the ball valve is the fact that it turns regardless of the pressure from the supply pipe. This is a valve which will not reduce the pressure of the fluid once it is fully opened.

Ball valves are mainly used to control the flow of high pressure liquids and gas lines. This is because they do not cause any drop in pressure or restrict fluid movement when fully opened. They are mainly used when the supply pipe has an inner diameter of 6 inches or less.

Unlike butterfly valves, ball vales are used to control gas flows. This can be attributed to the fact that they provide a reliable seal unlike the butterfly valves which do not give you that perfect seal.

Ball valves do not present any trouble turning in high pressure applications. Additionally, when ball vales are used in high pressure applications, a pressure balancing scheme is not required. The same cannot be said regarding the butterfly valves.

Ball vales have a very simple structure. They are also smaller and lighter compared to many other types of valves. Ball valves give very flexible soft seals which make it very easy for one to operate them.  Ball valves give the smallest level of fluid resistance compared to all other types of valves.

You can use the valve for many years without experiencing any loss in form of leakages. This basically means that the valve is reliable and cost effective in the long term. This is the kind of valve that can be engineered to stand extremely high pressure. In fact, you will realize that high pressure systems usually have a ball valve inside them.

This allows the valve to turn the system on and shut it off as required. The ball valve can have a number of ports in it. It can allow a number of porting combinations. If you are thinking of buying the ball valve, consider these advantages prior to making your purchase.

Hits: 4281

Posted by on in Valve News

b2ap3_thumbnail_ball-valve-internals.jpgWhat is a ball valve? It's a question new customers often ask us at Valtorc, so let's look into this to answer the question and explain what a ball valve is

A ball valve is described as a mechanical device that directs, guides and modulates the flow of various types of liquids by way of an opening of a ball which has an opening in the middle. The opening is referred to as the port. By turning the handle on the ball valve, this manually opens/closes the port which controls the pressure from the flow of the liquid. Durability and “perfect” shutdown/shutoff are what makes the ball valve advantageous over other type of valves.

Valves are found in our everyday living and may go unnoticed. For example, there are plumbing valves which are at our sinks in our spigots. There are valves inside our washing machines, dishwashers, gas fireplaces, outside water spigots, refrigerators and more. Various types of industries utilize valves for their productions. Such industries include electronics, power, automotive, printing, plastics, textiles, metal, medical, chemical and food, to name a few. The industries that utilize ball valves typically have a need for supporting high pressure and temps exceeding 480 degrees. Ball valves are simplistic to operate and repairs are made easily without being removed from their pipeline.

Being made of steel, brass, iron, bronze or PVC, ball valves can range in sizes from .2 to 11.81 inches. More complex control systems using valves that need to regulate flow through a pipe will need an actuator. The actuator controls the valve pneumatically or is motor-operated and keeps it positioned appropriately so that the flow of the liquid is precise to the changing pressures and flow levels.

The basic types of ball valves include Full Port, Reduced Port, V-port, Multi-port, Standard Port and Cavity Filler ball valve. There are 3-way and 4-way ball valves. Depending on the application would determine the type of ball valve being used. The specifications to be considered for determining the appropriate ball valve would be the temperatures and pressure, number of ports, valve size, type of body material, end connectors and configurations.

Hits: 9328

Posted by on in Valve 101

If you are in the valve world at all, you know that the plug valve oftentimes gets a bad rap. There are different reasons for this. One being that the maintenance for these valves is greater than that of other valves. They need to be lubricated while out in the field and more times than not, this is overlooked.

Secondly, due to the corrosiveness and high temperatures of the substances flowing through the plug valves, they tend to wear much quicker than that of some other valves. This means they require patching and maintenance on a regular basis.

Lastly, the plug valve is not the valve of choice when it comes to throttling. You will want a v port, butterfly or ball valve in those types of applications.

On a good note, the plug valve does not clog. And one of the most common uses for a plug valve would be in our homes or businesses where we utilize gas services. The brass, 2 port valve, which is used in gas lines, is conically shaped and its structure bares a handle. When the handle is turned to 90 degrees from the inlet and outlet ports of the valve, the valve flow is shut off. For the gas to flow though the pipes, the handle and plug would need to line up with the inlet and outlet ports of the valve body.

A straightforward description of a plug valve is best described as a rotational valve with a tapered disk resembling that of a plug.This plug or disk sits “long ways” in the valve and has a passageway bored through the center in order to accommodate passing air or fluids. This type of control for corrosive or high temperature air/liquids is economical and simple. With a 2 port valve there are two positions, open and shut. There are also multi-port valves available in the plug valve for different more complex type applications. In applications where there are more than 2 ports, you may have a need for a soft rubber overlay for a sure-tight shut off.Different types of seals are based upon gaskets. Some plug valves close against the gasket and some close directly on the seat.

Many oil field service companies, vacuuming devices and applications which are dealing with glassware stopcocks which create glass products, still utilize plug valves. It does indeed seem to be a dying breed of valves, but with the right material, the proper gasket/seat in a particular application, you may see that a plug valve can be successful for you…especially when expenses plays a factor in your decision.

To assist you better with your valve decision, make sure you contact your Valtorc sales specialist today. They can better educate you on what’s best for you and your application to obtain the maximum results of success.

Hits: 3927

Posted by on in Valve 101

We all know that valves are present in our everyday lives, but valves work a lot “behind the scenes”—controlling what might seem like the “uncontrollable”.  Without valves, we would have engineering issues on how to regulate and control steam, water, air, corrosive liquids, gases and other materials. You can already see WHY valves are important, but WHERE did valves originate, you ask? Good question…

Maybe ancient man watched the beaver as he built his dam across the river. In ancient times, man used tree trunks, thick grasses, rocks, boulders and branches to regulate water. The Egyptians and Greeks also designed valves to lead water to irrigate their crops and provide water to their villages. However, the Romans were the ones to truly develop their canal systems and had a higher engineered technology behind those systems. Due to various country invasions, one may be led to believe that the Romans stole some of their technologies that they utilized. Either way, the Romans took their technology findings on to further develop the bronze plug valve which enabled them to distribute water to buildings.

It was not until the Industrial Revolution that valves really evolved to the next level. Steam was the power required to reform and strengthen this era and replaced muscle or “horse” power. Valves along with the patented steam engine made it possible to pump water out of mines. During this time, the US was able to increasingly provide mining jobs to those out of work. Mining, agriculture, textile mills, manufacturing plants, steel production, transportation and many other industries were emerging quickly. The economy exhibited unprecedented growth and life was getting better financially for most. Water and steam along with the evolution of the valve, contributed highly to the success of the Industrial Revolution industries.

Today, there are diverse types of valves made of materials such as stainless steel, carbon steel, cast iron, bronze, brass, PVC, CPVC and other alloy materials. Valves can be very small in size or up to 102 tons, which is the largest valve in the world! (See http://www.valveworldexpo.com/cipp/md_valve/custom/pub/content,oid,1943/lang,2/ticket,g_u_e_s_t/local_lang,2)  The application determines what type of valve you would need in order for your line to be successful. When ordering your valves, you want to ensure that you work with a reputable company such as Valtorc International. They will want to know all aspects of your application to determine which type of valve(s) would be best suited for your needs. Here is something else to think about—ask the supplier/manufacturer if their products are made in the US.  Let’s strengthen our economy and keep sales in our country when we can!

Hits: 3077

Credit Application

Please fill out our credit application for purchase orders and net terms.  icon Download here (67.54 kB)

Distributors Wanted

Apply to become an official protected distributor.  Click here to fill out our distributor application. (Online Form)

Valve Product Catalog

Download our 2017 product overview catalog or call us to request a copy.   Click here to download (3.8MB PDF)
Icon Fast Shipping
For All Orders
Icon Massive Inventory
Most Items in Stock
Icon Product Testing
Quality Assurance
Icon Customer Support
on all orders