Valve Blog and News

Valtorc Valve News and Industry Related News, How-To's and FAQ's

  • Home
    Home This is where you can find all the blog posts throughout the site.
  • Categories
    Categories Displays a list of categories from this blog.
  • Tags
    Tags Displays a list of tags that have been used in the blog.
Valtorc

Valtorc

Valtorc has not set their biography yet

Posted by on in Valve 101

Sanitary ball valves emphasize a full bore design that empowers full liquid stream with insignificant pressure drop, making them perfect for taking care of thick fluids or fluids holding particles in the sustenance, refreshment, compound and pharmaceutical commercial ventures. The cutting edge ball valves are live stacked with adjusting toward oneself pressing and a plan that is particularly made for high cycle applications. Valtorc International tri-camp sanitary valves are an elite answer for your mechanical Sanitary Valve needs.

Valtorc ARRA Compliant Sanitary Valves are accessible in sizes extending from 1/2" to 12" in materials, for example, Stainless Steel. Valtorc Sanitary Valves are likewise accessible in sanitary butterfly valve structure, 2 Way or 3 Way setups and are accessible in L Port and T Port stream designs. Accessible end associations incorporate Threaded, Socket Weld, Butt Weld and Flanged. Clean ball valves are perfect for sustenance administrations, water, blending, and well being, pharmaceutical and comparable commercial ventures.

Optional cavity filler is accessible on most sanitary valve items. Our sanitary valves are ARRA consistent and constantly delivered out of our USA processing plant area. On the off chance that there is a valve you have address on, or in the event that you don't see a valve that meets your particulars, please contact our deals staff for quick support.

SANITARY BALL VALVE: Valtorc standard clean ball valve accessible 1/2" - 4" produced using high quality 316 Series stainless steel. 1000psi working weight, Tri-Camp closes, with discretionary PTFE pit fillers. It is tried and tested for nourishment and general concoction administration applications.

SANITARY PLUG VALVE: Clean connect valves are accessible to 316 series stainless steel in sizes 1" - 3". Valtorc sanitary attachment valves come in 2-way or 3-path designs with discretionary butt-weld or tri-cinch association closes.

SANITARY 3-WAY/4-WAY BALL VALVE: The arrangement 525-SN sanitary multi-port (3-way or 4-way) ball valve is produced using 316 series stainless steel accessible in sizes 1/2" - 4". The 525-SN is accessible in L/T/X or I port designs with tri-clip, tube weld and amplified tube weld association closes. 100% air tried submerged at 80-100psi.

SANITARY CHECK VALVE: Sanitary weigh valves are offered in sizes 1/2" - 6" with a 316 stainless steel body. Suitable for CIP, working weight up to 150pis and a temperature run between 30f - 225f. Clean tri-clip closes (discretionary butt weld) and standard FDA affirmed Viton seals (EPDM accessible upon solicitation).

CAVITY FILLED VALVE/CAVITY FILLER: Valtorc's depression filled ball valves are accessible in 2-piece flanged, 3 piece flanged and 3/4 way flanged setups. 92% PTFE filler, low torque plan, simple substitution and discretionary valve stem coat.

HIGH PERFORMANCE SANITARY BUTTERFLY VALVE: The superior clean butterfly valve is offered in sizes up to 12" in manual or impelled bundles. Perfect for sustenance benefits and fulfils USDA and FDA guidelines. FDA affirmed Viton or EPDM choices accessible upon solicitation.

Hits: 5416

b2ap3_thumbnail_3-way-stainless-steel-ball-valve-side-open-t.pngValtorc 316 stainless steel valves is a using pressurized water worked, diaphragm actuated valve in a lessened port globe arrangement produced altogether of 316 Stainless Steel. Both valves are supplied with uniquely outlined 316 Stainless Steel removable slip-on flanges to give 150 or 300 ANSI class flange connections that meet ANSI and ISO models. This is a perfect valve for control valve applications where liquid similarity is regularly an issue. The standard Electro-Polish complete on the 316 Stainless Steel parts offers great erosion imperiousness to numerous mechanical liquids, for example, seawater, high alkyl or high corrosive fixations or other forceful or destructive liquids.

304 Series stainless steel control valve holds 18% chromium and 8% nickel while 316 Series stainless steel control valve holds 16% chromium, 10% nickel and 2% molybdenum. The molybdenum is added to help oppose erosion to chlorides (like ocean water and de-icing salts).

316 Series stainless steel control valve is a high stream, bubble tight plan that mounts straightforwardly to any actuator. This expands actuator reaction time and lessens cost and space necessities. Lower introduced expenses are acknowledged as the requirement for tubing, fittings, sections and gathering work are lessened.

Type and uses of 304 Series stainless steel Valve

Valtorc Type 304 Series stainless steel Valve, with its chromium-nickel substance and low carbon, is the most flexible and broadly utilized of the austenitic stainless steels. Its compounds are all adjustments of the 18% chromium, 8% nickel composite. Sort 304 turns out to be impervious to oxidation, consumption, and toughness. All give simplicity of creation and cleaning, avoidance of item tainting offer an assortment of completions and appearances. Sort 304 stainless steels are utilized within consumption safe electrical walled in areas, auto trim and trim, wheel blankets, kitchen gear, hose cinches, ventilation systems, stainless fittings, stockpiling tanks, weight vessels and funneling.

Type and uses of 316 Series stainless steel Valve

Valtorc Type 316 Series stainless steel valve is an authenticate chromium-nickel stainless and high temperature opposing steel with better consumption safety as looked at than other chromium-nickel steels when presented to numerous sorts of concoction erosion bringing on components, for example, ocean water, saline solution results, and so forth. Since Type 316 stainless steel amalgam holds molybdenum bearing it has a more prominent imperviousness to concoction assault than 304. Sort 316 is strong, simple to-create, clean, weld and completion. It is extensively more impervious to results of sulphuric corrosive, chlorides, bromides, iodides and unsaturated fats at high temperature. Stainless steels holding molybdenum are needed in the assembling of specific pharmaceuticals so as to stay away from unnecessary metallic sullying. How the money adds up is that Type 316 stainless steel costs somewhat more forthright however you could spare a ton on the back end – particularly if your nook is going to be utilized outside. Something worth remembering when you're planning your next enclosure.

To request a free quote mail us at This email address is being protected from spambots. You need JavaScript enabled to view it. or call us on our toll free number 1-866-825-8672 that is 1-866-VALTORC.

Hits: 6775

Posted by on in Valve 101

The intention for a fire-safe valve is to maintain a strategic distance from or defeat ignitable fluid (liquid or gas or gasses encircled from liquid stage) to pass, at any rate for a given time and in any occasion in the midst of that period not in segregating aggregates, a close valve in the midst of overheating of the pipeline, brought on by fire or similar events. When you ought to utilize a blaze safe valve is given by a sensible danger examination. When you are obliged to utilize one is subject to any tenets, regulations and laws concerning the uncommon methodology, plant, pipeline, vessel or contraption you have. Check if fire safe tried sort or just fire safe configuration without test of real sort is needed.

b2ap3_thumbnail_fire-safe-direct-mount-ball-valve-series-160ss.pngFire tested certified ball valves: Valtorc International give fire safe affirmed ball valve by ASME/API standard 607 fifth versions, passed in June 2005. The similar standard is ISO 10497-5:2004. The standard was titled, Fire Test for Soft-situated Quarter-turn Valves. Fire safe valve was planned when the plant is under fire; the delicate seats were all burnt, the valve was still fixed by the exact valve ball & body. This will keep the harm as low as would be prudent.

Valve Series: 160 was endorsed with split body flanged pedal to the metal configuration, Belleville washer, and graphite gasket & stem pressing. This sort is intended for most businesses with qualified size 1/2" to 4" (Dn15 to Dn100) & qualified weight rating Class 150, 300 / Pn 10, 16, 25, 40 for thing 207 f, 207 s, 107 s and high weight valve Class 900, 1500 for Item 305 d, 305 f, 306 d, and 306 f sort. Valtorc is currently get ready new valves of distinctive sorts and sizes range for fire safe test.

Result of 3/4-Way Fire Safe Valve: The fire safe test asks the ball to square the port in the wake of terminating to keep from internal spillage. For 3/4-way valve, you'll have 3 ports however stand out ball. That is the reason nobody can get this going, the stand out ball can't obstruct 3 or 4 ports. The result Valtorc offer is to utilize suitable seals on multi-route valve to keep from external spillage while terminating, and set 3 or 4 fire safe valves on each one port. These 2-way fire safe valves will hinder the media by their fire safe outline.

Valtorc additionally gives fire safe ball valves that have been tested and affirmed to API 607 to meet today's security regulation prerequisites for petroleum and other combustible applications. The Howell Fire safe valves are accessible in strung, attachment weld, butt weld and flanged finishes. Sanitary valves are additionally accessible and accompany Tri-Clamp closes or with developed butt-weld closes.

Hits: 14304

Posted by on in Valve 101

b2ap3_thumbnail_fm-approved-logo-125.pngThe intention for a fire-safe valve is to maintain a strategic distance from or defeat ignitable fluid (liquid or gas or gasses encircled from liquid stage) to pass, at any rate for a given time and in any occasion in the midst of that period not in segregating aggregates, a close valve in the midst of overheating of the pipeline, brought on by fire or similar events. When you should utilize a blaze safe valve is given by a sensible danger examination. When you are obliged to utilize one is subject to any tenets, regulations and laws concerning the uncommon methodology, plant, pipeline, vessel or contraption you have. Check if fire safe tried sort or just fire safe configuration without test of real sort is needed.

Fire tested certified ball valves: Valtorc's fire safe affirmed ball valve by ASME/API standard 607 fifth versions, passed in June 2005. The similar standard is ISO 10497-5:2004. The standard was titled, Fire Test for Soft-situated Quarter-turn Valves. Fire safe valve was planned when the plant is under fire; the delicate seats were all burnt, the valve was still fixed by the exact valve ball & body. This will keep the harm as low as would be prudent.

Results of 3/4-Way Fire Safe Valve: The fire safe test asks the ball to square the port in the wake of terminating to keep from internal spillage. For 3/4-way valve, you'll have 3 ports however stand out ball. That is the reason nobody can get this going, the stand out ball can't obstruct 3 or 4 ports. The result is that Valtorc's offer is to utilize suitable seals on multi-route valve to keep from external spillage while terminating, and set 3 or 4 fire safe valves on each one port. These 2-way fire safe valves will hinder the media by their fire safe outline.

Valtorc additionally gives fire safe ball valves that have been tested and affirmed to API 607 to meet today's security regulation prerequisites for petroleum and other combustible applications. The Fire safe valves are accessible in strung, attachment weld, butt weld and flanged finishes. Sanitary valves are additionally accessible and accompany Tri-Clamp closes or with developed butt-weld closes.

Hits: 3286

Posted by on in Valve News

b2ap3_thumbnail_Country-of-Origin-Labels-US2-ba.gifThere are many benefits of picking an American valve company one of these are American valve is dedicated to providing dependable products and services of the highest standards. The American Valve brand has represented innovative research and products built with confidence and quality.

There are different featured items are accessible in American valve organizations.

Ball Valves: A ball valve is a valve with a round disk; it is the piece of the valve which controls the flow of water through it. The circle has an opening, or port, through the center so that when the port is in accordance with the ends of the valve, stream will happen. At the point when the valve is shut, the gap is perpendicular to the closures of the valve, and stream of water is blocked.

Valtorc offers varied range of Ball valves. These are Stainless Steel Ball Valves, Iron & Carbon Steel Ball Valves, PVC/CPVC Ball Valves, Brass Ball Valves, Sanitary Ball Valves, Kingston Ball Valves, Special Purpose Ball Valves are sturdier, less vulnerable to collecting form up and more enduring than a customary unprotected ball. This adds to a long arrangement of favorable circumstances over different sorts of valves.

Control Valves: Valves used to control conditions, for example, stream, weight, temperature, and fluid level by completely or somewhat opening or shutting because of indicators got from controllers that look at a set point to a methodology variable whose worth is given by sensors that screen changes in such conditions are Control Valves. Control Valve is additionally termed as the Final Control Element. We offer a full cluster of control valves guaranteed to meet ANSI/NSF Standard 61 and additionally California Proposition 65.

We begin with the finest materials accessible. Our crude materials are precisely observed to guarantee fitting synthetic creation. Each valve is tried for shutting snugness and usefulness to guarantee sheltered, trustworthy operation. Control valves from American Valve meet the vastest scope of code approbations in the business sector. Our valves are guaranteed to USA and universal models. Our valves are fabricated in the United States of America. The greater part of our valves and items are tried in our Georgia, USA based area before shipment.

Control valves are typically fitted with actuators and positioners. Pneumatically-activated globe valves and Diaphragm Valves are generally utilized for control purposes as a part of numerous businesses, despite the fact that quarter-turn sorts, for example, (changed) ball, entryway and butterfly valves are likewise utilized.

Control valves can additionally work with pressure driven actuators (otherwise called water powered pilots). These sorts of valves are otherwise called Automatic Control Valves. The pressure driven actuators will react to changes of weight or stream and will open/close the valve. Programmed Control Valves don't require an outside force source, implying that the liquid weight is sufficient to open and close the valve.

It is proven that American Valves contributing to vitality effectiveness and solace in modern and business structures over the United States.

Hits: 2825

Posted by on in Valve 101

b2ap3_thumbnail_firesafevalve.jpgWe all are worried about the safety of our loved ones and our assets. Life is uncertain, and it is not really possible to live free from the worries of any unforeseen natural or error-driven threats. As the machinery and industrial parts are getting more complex, the need to keep things in control is increasing more than ever. To prevent any unfortunate event of fire or accidental damage, you must use new age technology auto parts and tools.

One of the most recent developments in industrial tools to prevent any sad event due to fire is the introduction of fire safe valves. These valves are designed to prevent fire from spreading or turning into a life threat, if the fuel valve gets damaged or generates a leakage.

The fire safe valves constitute spring loaded valves which are thermally actuated. In case of fire, these close automatically and stop the fuel flow. The fuel flow from crankcase of the engine and the reserve oil supply gets hindered, thus minimizing the chances of leakage.

Preventing the flow of fuel such as oil, gas, petrol and other combustibles, these spring loaded valves prove to be very useful and effective against any damage. The benefits of using fire safe valves in a system are:

  • Protection of personnel or life
  • Lower insurance rates
  • Protection of equipment
  • Protection of environment
  • Prevents oil supply from feeding a fire


It is because of these advantages and benefits that the use of these valves is highly recommended and appreciated. These days, a number of companies offer a large range of fire safe valves which provide great protection even in high temperature and high pressure conditions.

You can find a wide range of valve products in the market these days, to be used in a multitude of places, from small equipment to giant machinery. Depending upon your requirements, you can select valves suitable for oil, gas, petroleum and other combustible fuels.

The price of the fire safe valves is not necessarily higher than the non-fire safe, making them a perfect alternative over the conventional choices. You can ensure safety of your equipment and the personnel around them, by opting for fire safe valves for your industrial machinery and tools.

So, get going and find a reliable supplier of these valves on the internet like Valtorc® International and get great protection from fire for your essential systems. After all, living without worries is what we all seek!

Hits: 4401

Posted by on in Valve 101

b2ap3_thumbnail_electric-actuator-exploded-view.pngAn electric actuator, also called as an electro-mechanical actuator, is a motor that makes use of electrical energy for producing mechanical energy. These are used in a number of applications and are favored by many industrial users.

Some of the advantages of electric actuators consist of the following:

  • Greater flexibility – Being highly flexible, these actuators are perfect to be used for machines or systems that require flexible processes.
  • Low replacement cost – Another major advantage offered by these types of actuators is the low replacement cost that they have. In fact, these offer great replacement value when used in applications wherein the electronics are independent of the actuator.
  • Greater accuracy – One of the greatest benefits of the electric actuators is the accuracy and precision that they offer. By employing high precision screws and anti-backlash mechanisms, users can get ultimate precision and accuracy, resulting in exact processes and results.
  • Low operational costs – It is important to note that even though the component costs of electric actuators tend to be on the higher side, still the operational and maintenance costs of these actuators is lower than the pneumatic actuators. Thus, they can be effectively used in those systems that require low maintenance and operational costs.
  • Ideal for systems where air is not available – These actuators are perfect to be used in those applications where air is not easily available. So, in case you are going to consider them for a place or situation where availability of air is a concern, and electricity is easily accessible, then go for these actuators.
  • Single source of supply – Electric actuators are great to be used for such applications which need just a single source of supply.
  • Easy installation – These actuators are not just convenient and easy to operate, but also come with simple to install wiring and offer absolutely easy installation. The installation costs of electric actuators are also on the lower side, so they are good to be used to obtain a number of advantages.
  • Accurate mounting – These actuators are suitable for applications that require accurate mounting, thanks to their great design and precise specifications.
  • No shortage of supply – In case there is a power outage, these actuators can still work with the help of a battery powered emergency power supply. So, there is nothing to worry about when these types of actuators are used in the valves.
  • Quiet operation – The electric actuators offer a smoother and quieter operation with the sophisticated technology that they have. So, in case you are looking for quieter, smoother and cleaner actuators, then these would be the right choice for you.

There are many suppliers of reliable and durable electric actuators such as Valtorc® International. Get the best in class products from this company and have smooth and glitch-free operations.

Hits: 4430

Posted by on in Actuated Valves

b2ap3_thumbnail_Pneumatic_Actuators.jpgA pneumatic actuator works by converting energy, which is usually in the form of compressed air. When it comes to pneumatic actuators, they offer a number of advantages to the users.

Listed below are few of the benefits offered by these types of actuators:

Components – Another major advantage offered by pneumatic actuators is their simple design and operating components. They are not just easily available, but are also relatively inexpensive & low priced.

Heavy loads – These actuators can easily tolerate heavy loads, and are thus, quite commonly used in a number of applications.

High force & speed – When used in linear motion control applications, wherein high precision is not a much essential parameter, these actuators offer high force and speed, which is difficult to find in any other actuator, except the hydraulic ones.

Easy accessibility of the source – For any pneumatic system to work, air is a major source. Easy availability of this source makes pneumatic actuators the preferred choice of many.

Easy channeling – Apart from being easily available, air can also be channeled and routed from one place to another. Thus, using the pneumatic actuators becomes easy through easy channeling of the source.

Safe to be used – Pneumatic actuators are safe to be used. Thanks to the use of air, they are not flammable and are not susceptible to short circuit, in contrast to the electric actuators.

Storage functionality – It is great to understand the fact that as the pneumatic actuators contain just compressed gases, they can be stored even in the absence of electricity or power. Thus, the users get another benefit with their use.

Clean technology – These types of actuators offer a clean technology to the users as they are less prone to contamination. Due to the use of air, which is free from harmful chemicals the pneumatic systems are quite well known in the food and pharmaceutical industries.

No overheating issue – The pneumatic actuators do not overheat upon excessive use, and are thus favored by many users in applications that require longer use.

Cost-effective substitute – A pneumatic actuator is said to be a cost effective tool for systems. With its easy installation and maintenance, it has become a great option to go for when you are looking for inexpensive actuators.

High durability – Another benefit of having pneumatic actuators is that they offer a long term use, thanks to their high durability. It’s good to note that these actuators can easily sustain constant pressures, which is great when you compare them with the other types of actuators.

Hits: 6531

b2ap3_thumbnail_p.pngElectric as well as pneumatic actuators are quite well known for their varied uses. In case you are confused as to which type of actuator out of these two will suit your needs, then we are there to help you.

An electric actuator is the one which makes use of electrical energy to produce mechanical energy. While, a pneumatic actuator, is an air operated actuator, which converts air pressure into mechanical force to operate the valve.

Read on to find the basic points of difference between an electric and pneumatic actuator.

  1. High force & speed – When it comes to the force and speed of the pneumatic actuators, then it is worthwhile to note that they offer more force and speed per unit size than the electric actuators. One can easily adjust the force and speed on the pneumatic actuators. Thus, for those of you who need to control and regulate the force and speed in the system, should go for pneumatic actuators without any doubt.
  2. Component cost – If you are considerate about the component costs of pneumatic actuators, then you would be glad to know that they are low. The electric actuators come with a hefty component costs, and are thus often avoided by the users.
  3. Operating cost – Regardless of the low component costs of pneumatic actuators, their maintenance and operating costs are quite high as compared to the electric actuators. These costs consist of replacement costs of the cylinders, electricity charges, airline installation and maintenance, etc.
  4. Heating – Owing to their perfect design that resists overheating, the pneumatic actuators are favored by many. In contrast, the electric actuators can tend to overheat. So, if you want an actuator that does not overheat easily, then go for the pneumatic one.
  5. Moisture – Another point of difference between these two types of actuators is their resistance to moisture. While the pneumatic actuators are insensitive to wet environment or moisture, the electric actuators need to keep well away from moisture.
  6. Stalling – When it comes to the pneumatic actuators, they can be stalled easily. But, the electric ones cannot be stalled during their operation or use.
  7. Torque to weight ratio – The pneumatic actuators have a high torque to weight ratio as compared to the electric actuators.

Thus, keep all these points in mind and go for that actuator that suits your requirements the best. After all, investing in these tools is not an easy decision to make! So, consider all the points of differences and opt for the right actuator.

Hits: 13765

Posted by on in Valve 101

b2ap3_thumbnail_damage-ball-valve-seats-stem.jpgAfter valve installation, it is important to take care of a ball valve and to ensure its proper maintenance. However, in many cases, even when you take great care of the valves to make sure that they function properly, still there might be cases wherein they need replacement.

This could be when the seals are broken or when some damage takes place in the valve. In fact, there can be several reasons for changing a ball valve. But what is important is to be aware of the procedure that is involved in its replacement.

Enumerated below are the few steps that can be followed to replace a ball valve in an easy manner:

  1. Buying the new valve and other supplies: You have to begin with this step. It is necessary to have all the essential things that you would need to replace the ball valve, before you take the old valve out. Thus, buy the new valve along with the supplies that are required. Ascertain the type of pipe, whether it is made up of copper, PVC, etc. Depending upon the type of pipe, you will have to buy the other necessary supplies.
  2. Turning off the water supply: The next step should be shutting off the water supply completely. Once this is done, you should then turn on the faucet, so that all the water that is sitting in the pipe comes out of the pipeline.
  3. Taking the old valve out: For removing the old valve from the pipe, you can use a hacksaw. Ensure utmost caution while you cut the pipe with the hacksaw and take the valve out of the pipe carefully, without damaging anything.
  4. Splicing the pipe & placing the new valve: After removing the valve, measure the opening to fit in the new valve and splice the new pipe with the old one. After this, put the new ball valve in place and close the pipe with the coupler.
  5. Checking the new valve: Once all the above mentioned steps are followed, turn the water and the faucets on. Make sure that the valve is working fine and there is no leakage. If you detect that there is some leakage, then take the corrective action to fix it immediately.
  6. In case, there is no leakage then turn off the water supply and seal the pipes back into the wall they are placed in. If necessary, you should repair the wall with a little paint and spackle.

By following these simple steps you can easily replace a ball valve. So, go ahead and buy your new ball valve and the necessary materials to replace the old valve. There are various manufacturers that offer great and durable valves. Contact them today and get the right products for your use, without any delay!

Tagged in: Maintenance
Hits: 2716

Posted by on in Valve 101

b2ap3_thumbnail_steel-ball-valves.pngAfter installation, it is important to take care of a ball valve and to ensure its proper maintenance. However, in many cases, even when you take great care of the valves to make sure that they function properly, still there might be cases wherein they need replacement.

This could be when the seals are broken or when some damage takes place in the valve. In fact, there can be several reasons for changing a ball valve. But what is important is to be aware of the procedure that is involved in its replacement.

Enumerated below are the few steps that can be followed to replace a ball valve in an easy manner:

  • Buying the new valve and other supplies: You have to begin with this step. It is necessary to have all the essential things that you would need to replace the ball valve, before you take the old valve out. Thus, buy the new valve along with the supplies that are required. Ascertain the type of pipe, whether it is made up of copper, PVC, etc. Depending upon the type of pipe, you will have to buy the other necessary supplies.
  • Turning off the water supply: The next step should be shutting off the water supply completely. Once this is done, you should then turn on the faucet, so that all the water that is sitting in the pipe comes out of the pipeline.
  • Taking the old valve out: For removing the old valve from the pipe, you can use a hacksaw. Ensure utmost caution while you cut the pipe with the hacksaw and take the valve out of the pipe carefully, without damaging anything.
  • Splicing the pipe & placing the new valve: After removing the valve, measure the opening to fit in the new valve and splice the new pipe with the old one. After this, put the new ball valve in place and close the pipe with the coupler.
  • Checking the new valve: Once all the above mentioned steps are followed, turn the water and the faucets on. Make sure that the valve is working fine and there is no leakage. If you detect that there is some leakage, then take the corrective action to fix it immediately.

In case, there is no leakage then turn off the water supply and seal the pipes back into the wall they are placed in. If necessary, you should repair the wall with a little paint and spackle.

By following these simple steps you can easily replace a ball valve. So, go ahead and buy your new ball valve and the necessary materials to replace the old valve. There are various manufacturers that offer great and durable valves. Contact them today and get the right products for your use, without any delay!

Hits: 2754

Posted by on in Valve 101

Once a valve is installed it is important that it is properly maintained, so that it works in an efficient manner. This is one such aspect which is overlooked many a times, but needs the utmost attention of the users. Poor or no maintenance of a valve can result in severe problems, leading to many obstructions in the processes for which it is being used. Therefore, it is extremely important that a valve is maintained well for better functioning and a long lasting as well as effective use.

Check after receipt

After receiving a valve, a complete and thorough examination of the product so received should be done. There might be cases wherein damages could have taken place in transit. So, the various components of the valve be it the actuator, its entire body or its ends, everything should be checked meticulously. In case a damaged valve is received, it should be replaced at the earliest to avoid any wastage of resources during the functioning of the valve.

Proper storage

If a valve is not being installed after its receipt, then it must be stored in a clean and safe place. It is important to note that the storage should be done in such a way that the valve stays away from grit, dirt, etc. If possible, it should be stored in a protective cover or casing till the time it is installed.

Clean the valve before installing

To ensure an uninterrupted flow of fluid, it is extremely important that the valve is cleaned and is free from all the dust particles, dirt, etc. This will not only help in the smooth functioning of the valve, but will also help in ensuring its long term use. It is also necessary that before its installation the valve should be completely dried out. Thus, dry air can be used for the cleaning purpose of the valve.

Manufacturer’s manuals

In case of any disruption in the working of a valve, you should always refer to the manufacturer’s manual. This will help to ensure proper valve maintenance and can also help you to sort out the minor technical glitches on your own, without the assistance of an expert.

Leakage detection

Whenever you detect any leakage from the valve, you should determine its cause, and then take the necessary corrective measure. Whether the valve needs repair or replacement, it should be decided only after thoroughly inspecting the cause of the leakage and the available solutions to correct the leakage. Many a times, it can be fixed by tightening a nut or a bolt. The pipe connections should also be regularly checked properly after the installation.

So, keep these simple and basic points in mind for proper valve maintenance & to ensure its efficient working. You can also reach to your manufacturer for any help on the valve maintenance.

There are many reliable manufacturers and suppliers of valves like Valtorc International, who can take care of all your requirements. So, contact them and get the peace of mind that you deserve.

Hits: 3188

Posted by on in Valve 101

b2ap3_thumbnail_control-valve-diagram-bw.gifControl Valves are the valves that are used to control different conditions. These are being frequently used in many areas to control the flow, temperature, pressure, or level of any liquid. They work by closing or opening either fully or partially, when signals are received from the controllers.

By assisting in controlling the flow/temperature of liquid, these valves are increasingly being employed in oil & gas as well as in manufacturing industries. This is not all! These valves are also used at homes to control the flow of water.

There are several advantages that these valves provide and some of their benefits are listed below:

  • Automatic Operation: One of the most important benefits offered by a control valve is that it controls the opening and closing process of a fluid automatically. Thus, the users don’t have to be careful about closing or opening the valves manually, when these types of valves are employed.
  • Easy Installation: Another great advantage of control valves is that they are absolutely easy to install. Many people can effortlessly install these valves on their faucets without having to call for assistance from a plumber or from the manufacturer. Thus, being easy to install, they help in saving the time and effort of the users.
  • Reduced Wastage: Due to the automatic operations of these valves, there is a great reduction in the wastage of resources. No matter whether these are being used in industrial or manufacturing processes, or at homes, they will ensure less wastage of resources, thanks to their efficient working.

In fact, these valves are extremely helpful in saving water. Studies have revealed that control valves can lead to water savings of up to 85 percent. Thus, they are helpful in meeting the rising demand for water, by reducing the wastage of this precious resource.

  • No Clogging: Another great benefit of flow control valves is that they do not obstruct the flow of the fluid. Small particles, deposits, dust, etc. do not clog the flow of the fluid due to the perfect design of these valves.
  • Help to be Ecologically Friendly: Businesses are under a constant pressure to meet the global ecological standards. With the usage of these valves, they can become ecologically friendly by reducing the wastage of natural resources and by ensuring their judicious use.
  • Increased Financial Returns: When resources are effectively utilized, the businesses are in a position to experience reduced process variability. This ultimately helps in attaining a strategic advantage, and increasing the financial returns.
  • Saving Money Becomes Easy: When control valves are used in faucets, they help a lot in water conversation. This means that people can save money on their water and/or sewer bills by using these control valves at their homes, offices, or factories.

Thus, there are various benefits which are offered by control valves. Get them from a reliable manufacturer and use them to experience all these benefits. Search online and find a good supplier of these valves at the earliest!

Hits: 6839

b2ap3_thumbnail_connection-ends-valves.jpgThere are various types of end connections that a valve can have. Depending upon the types of applications the valves are being used for, you can choose the right type of end connections. The common types of valve end connections are as follows:

Flanged Valve End Connections – These are one of the easiest connections to be installed or uninstalled from a pipeline. These are also one of the most commonly used end connections at present. As these are fastened to the pipe flanges, assembling or disassembling them is quick and easy. These are usually available in sizes from 15mm onwards. An important point to be mentioned about these types of end connections is that they are secured with several bolts. Thus, they ultimately need less tightening torque than what a threaded end connection requires. Hence, flanged end connections can be effectively used for various types of valves.

Threaded Valve End Connections – These types of end connections are suitable for low pressure piping systems. These are affordable and ensure quick assembly to the users, without any difficulty. In some cases, these connections may be welded around the joint, once they are assembled. However, this is not much in practice as it may cause some troubles in the efficient use of these types of valve end connections.

Socket Weld Valve End Connections – These types of connections are socketed so as to have a plain spigot end of the pipe. These are used on valves that are made up of steel, and for such applications that require higher pressure and/or higher temperature in pipelines that do not necessitate repeated disassembling. They ensure leakproof connections, that too for a long time span.

Butt Weld Valve End Connections – These types of end connections are manufactured in such a manner that each end of the valve is bevelled to match with the thickness and bevel on the pipe.   After this, the two ends are butted to the pipeline and are welded. They are used on steel valves, and as they have greater strength, they are perfect to be used for such applications that require higher pressure and/or temperature in pipelines. Also, these are ideal for all types of valves, and for use in those areas where repeated dismantling is not required.

You can easily find a reputed and well-known provider of these different types of valve end connections on the internet such as the Valtorc International. Such suppliers have various experts with them, who will help you pick the right products for your preferred areas of application.  So, contact the right manufacturer and get the most suitable valve end connections for your use.

Hits: 61043

Posted by on in Valve 101

One of the most important aspects of using a valve for any application is to determine its right size. Ascertaining the correct size is extremely important to have adequate control of flow rate. Sizing a valve is based on a number of factors. These are pipe size, type of material, flow design, pressure drop, and so on. On the basis of all these and other such factors, you can rightly size up a valve. After all, a correctly sized valve will enhance the flow accuracy and increase the rangeability as well!

size-valvesSteps involved in determining the accurate size of a valve

  1. Ascertain the required design flow rate
  2. Determine the operating flow
  3. Choose the pipe size
  4. Identify the Maximum Pressure Drop across the valve
  5. Compute the Valve Characteristics (represented as Cv )
  6. Choose the type of valve and body size, based on the chart or table supplied by the manufacturer
  7. Check that the computed Cv does not increase the actual Cv of the chosen valve. In case it does, then you must go through the chart provided by the manufacturer once again, and select a suitable valve.
  8. Now, you should evaluate if the valve control range is right or not
  9. If the computed Cv and valve control range are now appropriate, then the valve is of the right size. However, if any of these are not suitable, then again pick up another valve from the manufacturer’s chart or table and repeat the sizing process.

It is important to understand that sizing a valve correctly is a critical process to ensure the proper functioning of the system. Even though it may seem to be a difficult technique, it is not that tough! All that is required is a little familiarity with the system and access to the right information provided by the manufacturer. It becomes all the more easier if you take the help of experts while sizing a valve.

Choosing a good and reliable supplier of valves is an essential point that you should keep in mind. This is because when you deal with the right manufacturer, you get utmost peace of mind & top quality products.

There are several companies that are operating online these days. So, you can have a look at the products being offered by them on the internet, and can pick a renowned and trustworthy supplier of valves. This way, you will be assured of excellent products, that too, without having to put a lot of effort & time!

Hits: 3476

Posted by on in Valve 101

b2ap3_thumbnail_0108.gifBefore understanding the concept of a solenoid valve, we should first understand what a valve is.

A valve is a device which works by regulating or controlling the flow of a fluid. This fluid can be liquid, gas, slurry, etc. Valves are available in a wide variety of makes and designs, serving a variety of purposes.

Now, a solenoid valve is just the combination of a solenoid and a valve, which regulates the movement of gas or liquid by means of electric current. This electromechanical actuator stops, releases, distributes or combines fluids; and is being extensively used in a number of application areas.

Components of a Solenoid Valve

A Solenoid Valve has parts like a coil of wire (which is the Solenoid), a metal core, electrical connector, bonnet nut, body, etc. These components are necessary for the efficient functioning of the valve. In case a malfunction occurs in any of the parts, the operation of the valve will not be effective.

Hence, it should be checked regularly that all the parts are working in their best possible manner. If not, then replacement(s) might be required to ensure proper working of the valve.

Uses or Areas of Application

These engineered products are used in numerous areas. Some of the uses of a solenoid valve are as follows:

  1. Home Appliances: Be it a dishwasher or a washing machine, these appliances require solenoid valves to work efficiently.
  2. Gas Boilers: Another major use of these valves is in the gas boilers. In boilers, these valves work by controlling the flow of gas towards the burner.
  3. Automatic Irrigation Sprinkler Systems: Not just helping the homeowners of today, but these valves are quite popular in helping the agriculturists as well. The solenoid valves are used in the automatic irrigation sprinkler systems with an automatic controller or regulator.
  4. Dentistry: If you are wondering how these valves are helpful for the dentists, then don’t be amazed! The solenoid valves are used in the dentist chairs so as to regulate the air and water flow.
  5. Water Purifiers: One of the latest uses of Solenoid valves is in the water purifiers or RO water systems that are all the rage at present.
  6. Refrigeration Applications: Solenoid valves are also required in refrigeration applications to commence or restrict the flow in the refrigerant circuit, thereby automatically regulating the fluids in the system.

There are many uses of these excellent valves. However, what is important is that you choose a good supplier of such products, to ensure a long term and hassle free use for years to come. So, do a bit of research online and find a reliable manufacturer offering various types of valves.

Hits: 4910

Posted by on in Valtorc News

How To Order A Pneumatic Actuated Ball Valve Assembly

VT=PNEUMATIC ACTUATOR ALUMINUM ANODIZED
DA= DOUBLE ACTING
SR= SPRING RETURN
FO= SR FAIL OPEN
FC= SR FAIL CLOSED

STAINLESS PNEUMATIC
SSDA= STAINLESS DA
SSSR= STAINLESS SR
SSSRFO= FAIL OPEN
SSSRFC= FAIL CLOSED

BALL VALVES

BRZ-2PC-DM= BRASS 2 PIECE FULL PORT DIRECT MOUNT
BRZ-3PC-FP= BRASS 2 PIECE FULL PORT HANDLE
CS-3PC-MH = CARBON STEEL 3 PIECE FULL PORT HANDLE
SS-3PC-MH = STAINLESS STEEL 3 PIECE FULL PORT HANDLE
CS-HP6000 = CARBON STEEL FULL PORT PRESSURE 6000PSI
SS-HP6000 = STAINLESS STEEL FULL PORT PRESSURE 6000PSI
SS-FLG150 = STAINLESS STEEL FULL PORT FLANGED 150#
SS-FLG300 = STAINLESS STEEL FULL PORT FLANGED 300#
SS-3L/T-NPT= STAINLESS STANDARD PORT 3 WAY L OR T PORT
SS-3L/T-FLG150= STAINLESS 3 WAY FLANGED 150 L OR T PORT

VALVE SIZE
1/4"= 025
3/8"= 038
'/z"= 050
3/4"= 075
1 " = 100
1 1/4"= 125
1 '/2"= 150
2" = 200
21/2" = 250
3" = 300
4" = 400
6" = 600
8" = 800

 

 

OPTIONS

3 WAY VALVE L PORT = L
3 WAY VALVE T PORT = T
NAMUR SOLENOID VALVE NEMA 4X
CONDUIT CONNECTION 1/2"

PART# 9AAG -

VOLTAGE 115 VAC
24 VDC
12 VDC
220 VAC
24 VAC
EXPLOSION PROOF = XP

LIMIT SWITCH
NEMA 4X = LSN4
NEMA 7 = LSN7
POSITIONERS

3-15PSI = VP700
4-20MA = VP900

Tagged in: How-To Ordering Valtorc
Hits: 2718

Posted by on in Actuated Valves

b2ap3_thumbnail_actuated-valve-blog.pngValves are one of those critical inventions that go unnoticed by many. They play an important role in our world by controlling, regulating, guiding and directing the flow of assorted types of liquids, gases, steam or flowing materials such as mill, grain, etc.

Valves are made of steel, iron, steel, bronze or PVC and can handle high temperatures and pressure points. In certain applications, the velocity, which is controlled by the valve, is vital in the success of the system in which it is applied and can be manually controlled or automated. In every industry, there are various types of valves including ball, butterfly, v-port, solenoid, sanitary, knife gate, plug and many more. The following is just a few examples of where valves are critical in a particular application: sewage/waste water plant, dams that controls a body of water, valves in your vehicle that control gas flow or oil flow to your engine and oil and gas refinery companies.

Oftentimes, an actuator is attached to the valve to administer pressure control and flow control in applications where it is crucial that the actual value be the same as the set point value. This motor box is operated by pneumatic pressure or an electric current. It then changes this energy into motion which changes or moves the valve positioning in order to keep to the set point that was entered into the actuator by the operator.

Hits: 7434

Posted by on in Industry News

b2ap3_thumbnail_thumb_global-hrc-prices.pngSteel mills in Europe are attempting to implement price hikes nation wide that could affect USA sales of raw metal.  However, if outputs are cut more sufficiently, supply then could rise causing an increase in price for raw metal.  Any pickup in activity is likely to be short lived and only temporarily.  Producers may also lose any gains they secured in previous quarters of this year.

A more obvious upward trend is within selling figures to predict and commence around the turn of the year.  Distributors are expected to rebuild empty inventory in preparation for a season upturn in manufacturing and purchasing.  As business are improving credit restrictions and spending increases there should be a rising momentum in steel prices.  A better economic status will help boost raw materials in early 2014.  Moreover, the top price cycle forecast is to occur in the spring before transaction values fall as the seasonal holiday approaches faster.

Hits: 6523

Posted by on in Valve 101

ACTUATOR: A fluid-powered or electrically powered device that supplies force and motion to a VALVE CLOSURE MEMBER.

AIR SET: Also SUPPLY PRESSURE REGULATOR. A device used to reduce plant air supply to valve POSITIONERS and other control equipment. Common reduced air supply pressures are 20 and 35 psig.

AIR-TO-CLOSE: An increase in air pressure to the ACTUATOR is required to cause the valve to close. This is another way of saying the valve is Fail Open or Normally Open.

AIR-TO-OPEN: An increase in air pressure to the ACTUATOR is required to cause the valve to open. This is another way of saying the valve is FAIL CLOSED or NORMALLY CLOSED.

ANSI: An abbreviation for the American National Standards Institute.

ANTI-CAVITATION TRIM: A special trim used in CONTROL VALVES to stage the pressure drop through the valve, which will either prevent the CAVITATION from occurring or direct the bubbles that are formed to the center of the flow stream away from the valve BODY and TRIM. This is usually accomplished by causing the fluid to travel along a torturous path or through successively smaller orifices or a combination of both.

API: An abbreviation for the American Petroleum Institute.

ASME: An abbreviation for the American Society of Mechanical Engineers.

ASTM: An abbreviation for the American Society for Testing and Materials.

BALANCED TRIM: A trim arrangement that tends to equalize the pressure above and below the valve plug to minimize the net static and dynamic fluid flow forces acting along the axis of the stem of a GLOBE VALVE. Some regulators also use this design, particularly in high pressure service.

Hits: 10878

Credit Application

Please fill out our credit application for purchase orders and net terms.  icon Download here (67.54 kB)

Distributors Wanted

Apply to become an official protected distributor.  Click here to fill out our distributor application. (Online Form)

Valve Product Catalog

Download our 2017 product overview catalog or call us to request a copy.   Click here to download (3.8MB PDF)
Icon Fast Shipping
For All Orders
Icon Massive Inventory
Most Items in Stock
Icon Product Testing
Quality Assurance
Icon Customer Support
on all orders