• Strong one piece molded body design
• One piece standard SS square through-shaft for positive disc rotation and support
• Standard PP disc for higher 180°F temperature service
• Full body liner seat with integral flanges (eliminates the need for flange gaskets)
  ribbed for positive flange seating with minimum required torque
• Standard PVC body and SS Shaft are effectively isolated from the flow medium
  by the full liner seat
• Minimum eleven locking positions

• Strong one piece molded body design
• One piece standard SS square through-shaft for positive disc rotation and support
• Standard PP disc for higher 180°F temperature service
• Full body liner seat with integral flanges (eliminates the need for flange gaskets)
  ribbed for positive flange seating with minimum required torque
• Standard PVC body and SS Shaft are effectively isolated from the flow medium by the full liner seat

• NSF14/NSF61 Approved
• Safety blocks in both upstream & downstream direction
• Unique ball design offers minimum torque
• Replacement self-lubricating Teflon® seats
• Full port design – minimum pressure loss
• Easy installation with minimum maintenance
• Insured reliability through extended warranty
• Safety seal carrier with adjustment
• Safety design blow-out proof stem
• 4" valve can be venturied to fit 6" flanged or socket pipe connections
• Top & bottom mounting pads available for sizes 1/2" to 4"

• Top entry for easy maintenance
• Vertical or horizontal installation
• Available with external spring assist
• Large flow area
• No metal internals

• Double union design permits quick, easy piping system installation, removal, and maintenance
• One piece clear PVC body
• Filter screen easily removed for cleaning or replacing
• Designed for up to 150 psi working pressure
• Hydrostatically tested at 225 psi at factory before shipping

• NSF14/NSF61 approved
• Low torque
• Positive Shutoff
• One piece ball and stem
• Compact maintenance free design
• Chemical and corrosion resistant
• Socket or female threaded ends

• Full 5-5/8" diameter port
• Valve can be installed in both upstream and downstream directions for simple easy, safe system maintenance
• Stem has internal land above ball that is pressure seated to the body protecting the stem and stem seal from contaminants
• Long life self lubricated TFE seats that are easily replaceable
• Immeasurable pressure drops
• Handle indicates valve open/close position
• Safety design blow-out proof steam
• Standard ANSI BI 6.5 class 150 flange connection
• All valves are hydrostatically tested before being shipped

• Less than 1 PSI pressure to operate
• Operates in vertical or horizontal installations
• One piece seat and seal
• Excellent flow characteristics

• Testing performed with PVC materials at 73°F water temperature

• Testing performed with PVC materials at 73°F water temperature

The pool and spa valve incorporates the latest technology in full flow valve design. The self locking handle
makes it easiest to use and adjust and the lock ring closure allows quick, easy maintenance without the use of special tools. Port sizes use PVC or ABS pressure type. Silicone based grease should be used. Not petroleum based lubricants.