Double Acting & Spring Return Actuator

Features:

• Click here to download the Pneumatic Actuator Installation, Operation and Maintenance Manual
• Two external travel stops permit adjustments of +/- 5 degree. Note : Travel stops are located on end caps on size 045 only.
• Top quality bearings and Actuator seals form low friction and high cycle life to ensure trouble free operation. Same bearings are used for both high and low temperature operations.
• Modular pre-loaded spring cartridges with metal spring guides for use in both high and low temperature applications.
• Hard anodized extruded aluminum body with honed internal surface for strength, high cycle life, and low frictional resistance.
• Unique output shaft insert can be selected from a variety of standard sizes, including double D, ISO square, and round and keyed, or can be custom designed to fit any output shaft configuration.
• Standard end caps are rounded with no crevices to accumulate contamination. Optional end caps are available to provide 100% stroke adjustment in one direction.

Stainless Steel Pneumatic Actuator Series SSPA-10

Features:

• Pneumatic Actuator Body:  The all-SS housing is ideal for sanitary, pulp and paper, marine and a variety of other applications where corrosion-resistance is crucial.
• Bearings:  Replacable top and bottom TFE pinion bearings ensure low friction, stability up to 400°F and corrosion resistance.
• Heavy Duty Pinion:  The one-piece stainless steel alloy Pneumatic Actuator shaft has precision machined gear teeth for precise operations.
• Mounting:  ISO 5211 standard design provides direct mounting of most ISO pad valves, including Valtorc valves.
• Spring Cartridges: The heavy duty spring cartridges are designed for easy conversion of a double acting actuator to a spring return actuator, or to modify the torque output depending on air pressure.

Heavy Duty Series Pneumatic Actuator

Features:

• Click here to download the Installation, Operation and Maintenance Manual
• Nitrile rubber piston O-rings oer excellent sealing and wear.
• Optional low and high temperature seals and lube are available.
• RTFE Guide Band supports piston while providing smooth operation and extended life.
• Ductile iron center body.
• Modular design allows for installing power groups and spring cartridges so that actuators may be set up for dierent air pressures and for Fail Clockwise and Fail Counter-clockwise
• Safe, welded spring cartridges with numerous options for a broad range of air pressure conditions.
• Alloy steel, corrosion resistant and heat treated springs.
• Designed and manufactured for long high cycle life.

Limit Switch Series LSN4

Features:

• Aluminum die cast powder coated body High corrosion resistance
• Polycarbonate dome
• Fully adjustable spring loaded cams for easy setting
• Special printed circuit board to eliminate all wiring from the switch elements to terminals
• Protection against short circuit
• (2) 1/2 ” conduit entries
• Namur mounting as standard
• Weather proof Actuator IP 65 / IP 67
• Aluminum Body Material

Limit Switch Series LSN7

Features:

• Die Cast Aluminum housing is Powder coated for superior corrosion resistance
• Housings have captive cover bolts
• Dome is made from Polycarbonate and is shatterproof
• Unique two piece molded indicator helps for long life and flexibility
• Sonic Set cams are serrated to lock together ensuring settings are secured against vibration
• Color coded to ease wiring
• Special Printed Circuit Board eliminates all wiring from the switch element to the terminal. Provides protection against short circuits
• Temperature range: -20°C to 80°C (176°F)
• Stainless steel Actuator brackets are available
• Solenoid termination inside the switch box possible

Series 9AAG Solenoid Valves

Features:

• Namur Mount Solenoid Valve
• Nema 4
• 100% Duty Cycle
• Manual Override
• 24VAC
• 110V, 220V or 12 & 24 VDC
• Nema 7
• Dual Coil
• Temperature Raing:  0 F ~ 125 F
• 2.5W Power Consumption

Series VP-700 Positioner

Features:

• Available in rotary (ROT)
• Or linear (LIN)
• Precise calibration with simple span and zero adjustments
• Direct or reverse action
• Split range available
• Rugged aluminum enclosure with epoxy coating
• Vibration resistant
• Stainless steel gauges standard
• Various orifices available to increase/decrease flow

Series VP-900 Positioner

Features:

• Available in rotary (ROT) or linear (LIN)
• Precise calibration with simple span and zero adjustments
• Direct or reverse action
• Split range available
• Rugged aluminum enclosure with epoxy coating
• Vibration resistant
• Stainless steel gauges standard
• Various orifices available to increase/decrease flow
• Certified for ATEX

Series DGO Declutchable Gearbox Operator

Features:

• The Valtorc DGO Gear Operator is designed for use on Butterfly Valves, Ball Valves, and Plug Valves that utilize high pressure pneumatic actuators for operation.
• The Valtorc DGO Gear Operator is a de-clutchable operator for manually overriding the actuator.
• Small in volume, light weight, reasonable design and novel pattern.
• There are a range of sizes so the output torque matches the size of the pneumatic actuator and valve.
• There are two keyways 90° apart in the inner hole of the worm gear to allow for easy orientation of the valve.
• The gear operator is filled with special lubricant before leaving the factory. It is sealed after assembly providing dustproof and waterproof function and has a protection grade of IP65.
• The bottom of the gear operator should be connected with the valve and the bracket surface connected with the actuator. The valve stem coupling passes through the inner hole of the worm gear and the square end of the stem, which matches the square hole of the actuator.

Please note: due to our growing inventory, development and design of new products our online catalog may not show models that have just been released. If you do not see a particular product on this page that you need, call our sales team at 1-866-VALTORC or locally at 770-423-7100 for an immediate quote and assistance.