EL-300 Electric Actuator

Features:

• Captive Cover Bolt - Prevents loss when cover is removed for adjustments.
  Manual Override - Stainless Steel with wrench flats for easy manual operation.
• NEMA 4,4X Housing Design
• Dependable Permanently Lubricated gear train, great for actuated Valtorc Ball Valves
• Polyester powder coated aluminum cover and base are conversion coat pre-treated for superior corrosion resistance.
• ISO 5211 Mounting Pad - Female F03, F04, F05 Square or Diamond drive available
• High Strength Gears - All gears are heat treated alloy steel designed to AGMA standards and able to withstand stall torque conditions.
• 1/2" Conduit Entry - Extra 1/2" entry optional.
• Power to open/power to close

EL-600 Electric Actuator

Features:

• Click here to download the EL Series Electric Actuator Installation, Operation and Maintenance Manual
• VALTORC EL-600 Series Electric Actuator is a proven performer for on/off (open/close) valve and damper control. Combining low cost with an extremely high cycle life, the EL-600 Series Electric Actuator are a truly cost-effective, reliable solution to your simple valve actuation needs.
• Easy to install, with no ongoing maintenance required, EL-600 Series Electric Actuator are ideally suited for OEM applications. They are designed to supply years of trouble-free actuation.
• Efficient, Consistent Performance
• A powerful split phase reversing AC motor drives the
• EL-600 to produce breakaway torque from 150 to 600 in-lbs; DC motors are also available.
• The design of the VALTORC EL-600 Electric Actuator makes it one of the most cost-effective units on the market today. And because VALTORC EL-600 Electric Actuators are reliable and inherently low maintenance units (compared with pneumatic actuator alternatives), you’ll realize long-term efficiencies beyond the initial low price.
• All EL-600 Series Electric Actuators include a visual position indicator and a holding brake to prevent back driving in Butterfly Valve, damper and resilient-seated Ball Valve applications.
• Power to open/power to close

EL-700-V (705/710/720/730) Electric Actuator

Features:

• The EL-700-V is the replacement model for the older EL-700 Actuator.  Please click here to download the previous model spec sheet.  Click here to download the previous model IOM PDF.
  
• Torque Output Range: 347in-lb to 17,359in-lb
• Housing: NEMA 4, watertight, corrosion-resistant, powder coated, robust aluminum die cast works perfect with Valtorc Butterfly Valves and Ball Valves series
• Electric Motor: (Available in: 120VAC, 220VAC and 24VDC) single phase, 60Hz totally enclosed, non-ventilated, high starting torque, reversible induction type, Class F insulation
• Thermal Overload Motor Protection: Auto reset thermal switch embedded in the motor winding - trips when the maximum winding temperature is exceeded
• Position Limit Switches: 2 x SPDT for Open and Close travel limit - easily adjustable, cam operated Position Indicator: Mechanical dome type with visible red/yellow closed/open indicator
• Terminal Strip: Refer to wiring diagrams for details
• Conduit Entries: 1 x 1/2” NPT for power and control wiring
• Power Gears: Alloy steel spur gears to final stage aluminum bronze worm sector gear
• Break: An electro-mechanical brake is NOT required. The worm gear drive prevents back driving and hunting Bearings: High quality alloy steel sleeve and ball bearings
• Manual Override: Handle
• Ambient Temperature Range: -31°F to +150°F
• Certification and Approvals: CE, NEMA 4X
• Power to open/power to close

EL-750 Electric Actuator

Features:

• Due to characteristics of valve, the electric actutor must be able to provide high start up torque with full load whenever the valve is at open, closed or any other position. Valtorc EL-750 series electric actuators are designed for such working requirement and work well with our PVC Valve series
• Gear driving unit is made of alloy steel with heat treatment featuring high strength, excellent wear resistance and long term fatigue load impact.
• The crank handle is designed as detachable to minimize the dimension of the actuator.
• The integral construction of the wormgear and drive shaft provides long term dependable operation with high output torque.
• The captive cover bolt prevents bolt from dropping when cover is opened.
• The stainless steel stroke bolt and cam provide 0 - 90° adjustability.
• Power to open/power to close

EL-900 Spring Return Electric Actuator (Damper Style)

Features:

• Available torques of 177 lb·in (20 N·m) for single actuators, 354 lb·in (40 N·m) for two models, and 531 lb in (60 N·m) for three models mounted in tandem — offer a selection that is most suitable for the application
• Reversible mounting design — simplifies installation and enables the actuator to spring return in either direction
• Electronic stall detection throughout entire rotation range — extends the life of the actuator by deactivating the actuator motor when an overload condition is detected
• Removable coupler — adapts to a shorter damper shaft
• Integral 48 in. (1.2 m) halogen-free cables with colored and numbered conductors — simplify field wiring
• Integral auxiliary switches — provide one fixed and one adjustable switch point with line voltage capability
• NEMA 2 (IP54) rated aluminum enclosure — protects the internal components of the actuator from dirt and moisture

EL-910 Quarter Turn Electric Actuator

Features:

• Standard enclosure to water proof and water tight to IP 67, NEMA 4 & 6. Explosion proof Ex d IIBT4 is also available.
• Squirrel cage motor is of encapsulated type, high stall torque and low inherent force for seating and unseating of valves. All motors are integrated with build-in thermal protection.
• Internal Components Arrangement Internal mechanical and electrical components are designed in modular mounting arrangement, and can be easily removed for maintenance purpose. Optional Electric Actuator accessories are also available.
• A pair of limit switches are activated by means of simple, reliable and adjustable cam plates, mounted directly on, and driven by center column. The unique cam plate design does not allow over travel of limit switches. Two auxiliary limit switches are standard.
• Electric Actuator with 885 In-Lbs and above, are installed with torque switches for over load protection, works hand in hand with our Butterfly Valves series.
• A 20 or 5 watt space heater is provided inside all the VALTORC Electric Actuators for prevention of condensation due to weather and temperature changes, as well as to keep internal components clean and dry.
• All Electric Actuators have a self locking worm gear design to keep position of valve unchanged against reverse torque of valve.
• Hand-wheel on the Electric Actuator ensures adequate strength for safe and efficient emergency operation.
• The manual override is engaged by pulling the lever and turning the hand-wheel. Lever declutches automatically when power supply is switched on, and hand-wheel does not turn as extra safety feature.
• The visual position indicator is directly mounted on the center drive column to show the visual position of the valve.
• One each for open and close position (adjustable). Provides for +/- 5 degrees adjustment.
• Bottom flange mounting dimensions conform to ISO 5211. An adaptor drive bushing is provided for every electric actuator to provide direct mounting to all VALTORC Actuators.

EL-920 Electric Actuator

Features:

• Standard enclosure IP-67, NEMA 4, 4x
• Squirrel cage, totally enclosed motor
• Standardized and color-coded wiring
• Manual override hand/auto declutch lever, automatic reset when motor is energized
• Handwheel designed for safe, efficient operation
• Standardized mounting pad for ISO-5211 valve mounting. Blank drive bushing for custom fit.
• Wormgear drive for longer life and a low maximum noise level of only 50dB
• Indicator is top mounted for continuous visual indication of valve position
• Standard 20 watt internal heater, minimizes condensation due to temperature and humidity changes
• Cam actuated, end of travel limit switches are easily adjusted to de-energize actuator for precise valve position
• Torque switch is cam actuated and factory set to provide over-torque protection
• Mechanical limit stops designed to prevent over-travel of quarter turn applications

EL-930 Spring Return Electric Actuator

Features:

• Torque: 450"lbs / 50Nm
• Supply Voltage: 24VAC/DC, 120VAC, 230VAC
• Control: On/Off, Jog/Float, Proportional
• Environmental Rating: Nema 4, Nema 4x
• Service: Ball Valve, Butterfly Valve, Plug Valve
• Mechanical Connections: ISO5211 F07 8pt 17mm
• Motor Protection 120vac or 230vac
• Operation: Split Phase Capacitor, 275OF/135OC Thermal F Class
• Motor Protection 24vac or 24vdc Operation: Brush type DC Motor, 275OF/135OC Thermal F Class
• Electrical Entry: (2) 3/4” NPT
• On/Off or 2 Position control is used for damper or valve applications where the requirement is for either  fully open or fully closed positioning
• Auxiliary switches are rated 10A @ 250vac MAX

EL-940 Spring Return Electric Actuator

Features:

• Torque: 1750"lbs / 200Nm
• Supply Voltage: 24VAC/DC, 120VAC, 230VAC
• Control: On/Off, Jog/Float, Proportional
• Environmental Rating: Nema 4, Nema 4x
• Torque: 450"lbs / 50Nm
• Supply Voltage: 24VAC/DC, 120VAC, 230VAC
• Service: Ball Valve, Butterfly Valve, Plug Valve
• Motor Protection 120vac or 230vac Operation:  Split Phase Capacitor 275OF/135OC Thermal F Class
• Manual Override: 15.8” HandWheel
• Ambient Temperature Operating Range: -22oF to +150oF; -30oC to +65oC
• Electrical Entry:  (2) 3/4” NPT

Electric Actuator Series XP

Features:

• Tough Manual Override Electric Actuator
• Captive Cover Bolts:  Prevents loss when cover is removed for adjustments.
• 15amp SPDT:  Two extra switches are also available, including field kits.
• Fine Adjust Cam:  Allow 90 degree to 270 degree rotation
• Polyester powder coated aluminum, cover and base are conversion coat per-treated for superior corrosion reistance.
• 1/2" conduit entry:  Two entries, once each side of the Electric Actuator
• Plotted leads:  Optional sealed leads prevents moisture ingress from conduit runs

Uninterruptible Battery Backup Systems Series UPS9

Features:

• Click here to download the UPS9 troubleshooting guide PDF
• The UPS9 is fitted with a heater and terminal strip that makes it easy for customer wiring.
• Charging circuit re-charges battery to full charge within 4 hours after a power loss ready for the next power failure.
• A status indicator shows when the battery is in use.
• 120Vac opertion. Also: 230Vac, 12Vdc, 24Vdc and 24Vac units are available.
• 12 x 10 x 6 NEMA 4 Continuous Hinged enclosure with mounting flange.
• Optional switches including push to re-set buttons available.
• Consult the factory for Explosion-proof enclosures.

Please note: Due to continuous development of our product range, we reserve the right to change the dimensions, pictures and information contained on our website and product catalogs.  Furthermore, due to our growing inventory, development and design of new products our online catalog may not show models that have just been released. If you do not see a particular product on this page that you need, call our sales team at 1-866-VALTORC or locally at 770-423-7100 for an immediate quote and assistance.